Matronics Email Lists :: View topic - Error in new 912 line maintenance manual?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Error in new 912 line maintenance manual?

Matronics Email Lists Forum Index -> RotaxEngines-List

View previous topic :: View next topic

Author Message

johnwigney(at)windstream.
Guest

Posted: Sun Dec 20, 2009 12:09 pm Post subject: Error in new 912 line maintenance manual?

Hi Dick, 

 

 I have been unable to contact anyone at Rotax to confirm this but I believe the new manual has at least one important typo or translation error. On page 32 of the last chapter, there is the basic throttle setting procedure. At step 5 it says :-

   	  Quote: 	
		  "Pull out feeler gauge and then turn each idle speed adjustment screw 1.5 turns counter clockwise."



This does not make much sense and is contrary to the instructions in the Rotax video and the earlier yellow manual which clearly say  "turn each idle speed adjustment screw 1.5 turns clockwise." Perhaps someone else knows how to get this corrected by Rotax.



Cheers, John 



912S 

Mooresville, North Carolina 

	
  [quote]ORIGINAL MESSAGE

From: Catz631(at)aol.com (Catz631(at)aol.com)

Subject: New line maint manual

Went to Office Depot and gave them the URL for the new manual and they were 

able to print it , bind it with wire coil and covers for $17. That was good 

for me as the thing is almost 1/2 inch thick printed both sides.

 I read it last night and it is a much better manual than the old one even 

though the English is much the same as the English found in the instructions 

for a Harbor Freight tool ! But then I can't speak German so what the heck.

Dick Maddux 912 UL Milton,Fl[b]

- The Matronics RotaxEngines-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

daberti(at)sbcglobal.net
Guest

Posted: Sun Dec 20, 2009 2:20 pm Post subject: Error in new 912 line maintenance manual?

Is the  feeler gage the same size?

 [quote]   

   --

- The Matronics RotaxEngines-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RotaxEngines-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum