Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Tip of the day for an oozing valve cover

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List
View previous topic :: View next topic  
Author Message
Roger Lee



Joined: 10 Jan 2006
Posts: 1464
Location: Tucson, Az.

PostPosted: Sun Dec 06, 2009 12:24 pm    Post subject: Tip of the day for an oozing valve cover Reply with quote

Do you have a leaky valve cover or it just oozes a little oil on the bottom edge, but not enough to drip. Well the tip of the day for a fix.

I have tried new "O" rings, Loctite 574 and and Loctite 5910 and they still oozed. The fix is to pull them off. Lay the valve cover flat on a piece of 220 grit sandpaper and lightly sand the edge down. You will see when you do this shiny spots where the sandpaper has touched and a dull flat looking edge where it did not. Lightly sand the edges on the flat surface until you see a shiny surface all the way around. You aren't trying to sand it to death. Take off just enough for the dull color on the edge to be shiny. Clean the edges after sanding with a good cleaner and clean the surface of the cylinder surface mating up to the new surface of the valve cover. Then coat the "O" ring with a light coating of white grease (compatible with fuel) and torque the screw to 90 in/lbs. The sanding takes out any imperfections in the valve cover edge and allows more "O" ring pressure against the mating surface.
Have a nice X-mas!!!!


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

_________________
Roger Lee
Tucson, Az.
Rotax Instructor & Rotax IRC
Light Sport Repairman
Home 520-574-1080 TRY HOME FIRST
Cell 520-349-7056
Back to top
View user's profile Send private message Send e-mail
dan(at)azshowersolutions.
Guest





PostPosted: Sun Dec 06, 2009 1:29 pm    Post subject: Tip of the day for an oozing valve cover Reply with quote

Thanks Roger,
That's a good one.
Dan B
Mesa, AZ

---


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group