rdunhamtn(at)hotmail.com Guest
|
Posted: Wed Dec 09, 2009 4:46 am Post subject: PM /OV filter and OV protection kit for Jab3300 |
|
|
Chris
Just reviewed the products listed and wiring diagram.
That's the unit I installed on my Sonex/Jab3300 with single phase ALT. I wired it just like the drawing.
The 3 phase v 1 phase issue is related to the voltage regulator (VR) C I think. I used the "standard" Kubota regulator and have had no problem at all. That is C after I connected the yellow wire (not shown in B&C drawing) to the VR output. It's a voltage probe and the VR won't charge unless it can sense its own output. Or mebbe it's sensing the battery condition. At any rate. If you connect the yellow wire (assumes Kubota VR) to the red output wire the VR should work as advertised and so will the OVPM.
Rod
Windows Live Hotmail gives you a free Cexclusive gift. Click here to download. [quote][b]
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|