Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

EGT probes

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

dlm46007(at)cox.net
Guest

Posted: Sun Dec 27, 2009 12:54 pm Post subject: EGT probes

Just a follow up to  he previous post. The problem was the probe; First I examined the probe and did  not find it to be destroyed like the first so I considered that it might me the  bad crimps in the connection to the EIS. After re-crimping and soldering, the  probe still read 500F below the others. After replacing the probe with a new  higher? quality one from GRT, the #6 probe reacts like the others. For future  reference it would probably be in the builders best interest to pay extra for  the higher quality probes or get them from Alcore or GEM or EI instead. I have  spent an extra 5-10 hours of labor checking and changing these probes. If there  is another premature failure on the GRT originals I may try GRT higher quality  probes, If #6 fails prematurely I will be going the third party probe  route.

  

 N46007 RV10  220TT

   [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum