Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Static Grounding

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

jbr79r(at)yahoo.com
Guest

Posted: Thu Dec 31, 2009 9:02 am Post subject: Static Grounding

I fly a composite (E-glass not Carbon) Glasair and I am trying to deal with some static problems.  A suggestion was to run a separate ground wire from radios stack , the EFIS  and the AHRS directly to the ground buss as close to the battery as possible.  Static wicks are not an option . Any comments or ideas?

Jim

 

James Robinson

Glasair lll  N79R

Spanish Fork UT  U77



  

 [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Thu Dec 31, 2009 11:51 am Post subject: Static Grounding

At 10:59 AM 12/31/2009, you wrote:

 	  Quote: 	
		  I fly a composite (E-glass not Carbon) Glasair and I am trying to 

deal with some static problems.  A suggestion was to run a separate 

ground wire from radios stack , the EFIS  and the AHRS directly to 

the ground buss as close to the battery as possible.  Static wicks 

are not an option . Any comments or ideas?


	


    If you're plagued with p-static in flight, then

    some form of surface treatment combined with

    static wicks are the only option. Grounds in

    the electrical system have no significance

    on this  issue.



    P-static in all composite aircraft having no

    submerged lightning mesh has been a problem

    since day-one. It's not an electrical/electronics

    problem.



    Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

XeVision

Joined: 07 Oct 2009
Posts: 26
Location: Ogden, Utah

Posted: Thu Dec 31, 2009 12:00 pm Post subject: Re: Static Grounding

 	  jbr79r(at)yahoo.com wrote: 	
		  I fly a composite (E-glass not Carbon) Glasair and I am trying to deal with some static problems.  A suggestion was to run a separate ground wire from radios stack , the EFIS  and the AHRS directly to the ground buss as close to the battery as possible.  Static wicks are not an option . Any comments or ideas?

Jim

 

James Robinson

Glasair lll  N79R

Spanish Fork UT  U77

	




I am in Ogden, UT and also fly a Glasair (I-RG) cruising at 200Kts Similar speeds (oversized engine 245 HP). 

Are you talking about static when flying through rain or snow ??? Or something else ??



When flying to Alaska a few years ago, Flying in some light snow at like 12-13K, I experienced such a static problem once that the cockpit was glowing and everything metal I touched shocked me.  

I made the mistake of touching the remote head (panel mounted control) for my ELT it it got "fried".



All the radios were loud static noise and sometimes a howling sound.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
LED still has a long way to go to compete with HID as a landing light. This is true in terms of total lumens and reach (distance).

jbr79r(at)yahoo.com
Guest

Posted: Thu Dec 31, 2009 12:35 pm Post subject: Static Grounding

I know I can't do much about the static, but I'm trying to do what ever I can to protect the avionics.

 

James Robinson

Glasair lll  N79R

Spanish Fork UT  U77

From: "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com>

To: aeroelectric-list(at)matronics.com

Sent: Thu, December 31, 2009 12:49:33 PM

Subject: Re: Static Grounding



 --> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)>



At 10:59 AM 12/31/2009, you wrote:

 	  Quote: 	
		   I fly a composite (E-glass not Carbon) Glasair and I am trying to deal with some static problems.  A suggestion was to run a separate ground wire from radios stack , the EFIS  and the AHRS directly to the ground buss as close to the battery as possible.  Static wicks are not an option . Any comments or ideas?


	


   If you're plagued with p-static in flight, then

   some form of surface treatment combined with

   static wicks are the only option. Grounds in

   the electrical system have no significance

   on this  issue.



   P-static in all composite aircraft having no

   submerged lightning mesh has been a problem

    

 [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

jbr79r(at)yahoo.com
Guest

Posted: Thu Dec 31, 2009 12:38 pm Post subject: Static Grounding

I have been in and around clouds without any static like you mentioned but I lost the com port on my Chelton and the display screen on my TruTrak autopilot twice. 

 

James Robinson

Glasair lll  N79R

Spanish Fork UT  U77

From: XeVision <dblumel(at)XeVision.com>

To: aeroelectric-list(at)matronics.com

Sent: Thu, December 31, 2009 1:00:07 PM

Subject: Re:  Static Grounding



 --> AeroElectric-List message posted by: "XeVision" <dblumel(at)XeVision.com (dblumel(at)XeVision.com)>



[quote="jbr79r(at)yahoo.com"]I fly a composite (E-glass not Carbon) Glasair and I am trying to deal with some static problems.  A suggestion was to run a separate ground wire from radios stack , the EFIS  and the AHRS directly to the ground buss as close to the battery as possible.  Static wicks are not an option . Any comments or ideas?

Jim

 

James Robinson

Glasair lll  N79R

Spanish Fork UT  U77



 	  Quote: 	
		   [b]


	




I am in Ogden, UT and also fly a Glasair (I-RG) cruising at 200Kts Similar speeds (oversized engine 245 HP). 

Are you talking about static when flying through rain or snow ??? Or something else ??



When flying to Alaska a few years ago, Flying in some light snow at like  

 [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

bgray(at)glasair.org
Guest

Posted: Thu Dec 31, 2009 1:40 pm Post subject: Static Grounding

Hi Bob,



I'm building a Glasair III, an E-glass composite. While I don't have a

metal mesh embedded in my skin, I was thinking of using a conductive

vinyl ester primer bonded to static wicks to tame the P-static demon.

Should I be concerned with the primer blocking the effectiveness of my

internal COMM/NAV/GPS antennas? I suppose I could mask those areas and

reshoot them with a normal primer but would that give me a rather

directional radiation/reception pattern on my antennas?



Is there any way I can test the effectiveness of a conductive primer on

e-glass in p-static suppression before I bite the bullet?



Bruce

www.Glasair.org 



--

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

mprather(at)spro.net
Guest

Posted: Thu Dec 31, 2009 4:03 pm Post subject: Static Grounding

I don't have an answer, but a bit of speculation..



I suspect that p-static doesn't build as a uniform voltage all over the

airframe, but instead as a charge distribution along the pathway of high

speed airflow.  As such, I'd think you might be able to get rid of

p-static by adding a conductive path roughly aligned with the flow.  This

allows bleeding the charge off quietly.  The mesh is certainly the best

solution for providing this path, but I could imagine that other

techniques could be used.  Conductive coatings seem like a reasonable

thing to try.  I imagine that they are somewhat process sensitive, and

probably won't work as well as mesh - or a metal airframe.



Depending on where your antennas are, you could probably get away with

omitting the coating in these areas.  I kind of suspect if the coating

works well at warding off the p-static, it will also cause problems if

used over the antennas, and if it doesn't work well, you could spray it

everywhere and the antennas won't care.

Matt-



[quote] 



 Hi Bob,



 I'm building a Glasair III, an E-glass composite. While I don't have a

 metal mesh embedded in my skin, I was thinking of using a conductive

 vinyl ester primer bonded to static wicks to tame the P-static demon.

 Should I be concerned with the primer blocking the effectiveness of my

 internal COMM/NAV/GPS antennas? I suppose I could mask those areas and

 reshoot them with a normal primer but would that give me a rather

 directional radiation/reception pattern on my antennas?



 Is there any way I can test the effectiveness of a conductive primer on

 e-glass in p-static suppression before I bite the bullet?



 Bruce

 www.Glasair.org



 --

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

klburris

Joined: 19 Dec 2009
Posts: 18

Posted: Fri Jan 01, 2010 2:05 am Post subject: Static Grounding

[img]cid:image001.jpg(at)01CA8A85.B32A7CB0[/img]       <![endif]-->    

James:   	  Quote: 	
		  You wrote: “I fly a composite (E-glass not Carbon) Glasair and I am trying to deal with somestatic problems.  A suggestion was to run a separate ground wire from radiosstack , the EFIS  and the AHRS directly to the ground buss as close to the batteryas possible.  Static wicks are not an option . Any comments or ideas?Jim<![if !supportEmptyParas]> <![endif]> James RobinsonGlasair lll  N79RSpanish Fork UT  U77”<![if !supportEmptyParas]> <![endif]>static problems.  A suggestion was to run a separate ground wire from radios 	
0  

 AUTOTEXTLIST \s "E-mail Signature" <![endif]-->  

<![if !supportLists]>n      <![endif]>Keith  

<![if !supportLists]>n      <![endif]>Kanosh, UT (Kanosh International, 800’, 0-36)  

<![endif]-->[img]cid:image002.gif(at)01CA8A85.B32A7CB0[/img]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

image001.jpg

Description:

Filesize:

4.29 KB

Viewed:

7440 Time(s)

image002.gif

Description:

Filesize:

7.65 KB

Viewed:

7440 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum