 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
GrummanDude
Joined: 15 Jan 2006
Posts: 926
Location: Auburn, CA
|
 Posted: Mon Mar 01, 2010 11:47 am Post subject: The Baffle saga continues . . . . . damn it |
 |
|
Remember a few weeks ago when I said I picked up $4500 worth of baffles? There are 16 different baffles altogether. I had 10 pieces made of each one. When I picked them up, there were 13 sets of 10. I figured I'd miscounted and left it at that. I was excited just to get the baffles.
Turns out, the baffles for cylinders #2 and #4 and the baffle that holds the oil cooler were missing. I called, had them look up the baffles, and had them made. Another $1000.00.
Wouldn't you know. . . The CAD files baffles for cylinders #2 and #4 were some earlier files I created (well, I hired a CAD person to make the drawings for me) at the beginning of the drawing process. These drawings, somehow, got saved on a disk and handed off to another CAD person for the FAA redline corrections. So, for most of the time I was getting the drawings approved, I was holding drawings I thought were being approved and the second CAD guy was making changes to a different set of drawings. Something similar happened to the oil cooler baffle. Not quite as bad, but, still.
Then, more drama. The #3 baffle was made from a Van's RV6 baffle. My drawings were exact copies. In fact, I made a paper copy and glued it to the Van's and it fit. Turns out, the angle (on the bottom that displaces the upper portion away from the engine) on the Van's part is off by about 3 degrees. This is OK on the Van's install because his right rear baffle is kind of crudely bent into shape; final fit and trim is made by the installer. Unfortunately, the parts I'm having made are exactly how they are drawn. The #3 cylinder baffle won't nest into the right rear light it should. So, bottom line, the 10 #3 baffles and 10 right rear baffles I had made, are wrong.
For the last week I've been driving to the Bay Area to work with the CAD guy at the fabricators and driving to Folsom to work with the CAD guy that made the baffles in the first place. All the drawings were finalized yesterday, Sunday.
Good news is, the cowling is mounted on the plane and it's waiting for baffles.
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
| Description: |
|
| Filesize: |
1.13 MB |
| Viewed: |
1117 Time(s) |
|
_________________
Gary
AuCountry Aviation
Home of Team Grumman |
|
| Back to top |
|
 |
haveblue1(at)mac.com
Guest
|
| Posted: Mon Mar 01, 2010 6:49 pm Post subject: The Baffle saga continues . . . . . damn it |
|
|
Gary,
So, another visit from Mr. Murphy, of Murphy's law.
Awesome looking cowl!
Bruce
On Mar 1, 2010, at 2:30 PM, teamgrumman(at)aol.com (teamgrumman(at)aol.com) wrote:
| Quote: | Remember a few weeks ago when I said I picked up $4500 worth of baffles? There are 16 different baffles altogether. I had 10 pieces made of each one. When I picked them up, there were 13 sets of 10. I figured I'd miscounted and left it at that. I was excited just to get the baffles.
Turns out, the baffles for cylinders #2 and #4 and the baffle that holds the oil cooler were missing. I called, had them look up the baffles, and had them made. Another $1000.00.
Wouldn't you know. . . The CAD files baffles for cylinders #2 and #4 were some earlier files I created (well, I hired a CAD person to make the drawings for me) at the beginning of the drawing process. These drawings, somehow, got saved on a disk and handed off to another CAD person for the FAA redline corrections. So, for most of the time I was getting the drawings approved, I was holding drawings I thought were being approved and the second CAD guy was making changes to a different set of drawings. Something similar happened to the oil cooler baffle. Not quite as bad, but, still.
Then, more drama. The #3 baffle was made from a Van's RV6 baffle. My drawings were exact copies. In fact, I made a paper copy and glued it to the Van's and it fit. Turns out, the angle (on the bottom that displaces the upper portion away from the engine) on the Van's part is off by about 3 degrees. This is OK on the Van's install because his right rear baffle is kind of crudely bent into shape; final fit and trim is made by the installer. Unfortunately, the parts I'm having made are exactly how they are drawn. The #3 cylinder baffle won't nest into the right rear light it should. So, bottom line, the 10 #3 baffles and 10 right rear baffles I had made, are wrong.
For the last week I've been driving to the Bay Area to work with the CAD guy at the fabricators and driving to Folsom to work with the CAD guy that made the baffles in the first place. All the drawings were finalized yesterday, Sunday.
Good news is, the cowling is mounted on the plane and it's waiting for baffles.
<IMG_1001.JPG> |
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
jamey
Joined: 10 Jan 2006
Posts: 124
|
| Posted: Mon Mar 01, 2010 9:58 pm Post subject: The Baffle saga continues . . . . . damn it |
|
|
Damn sexy!
From: owner-teamgrumman-list-server(at)matronics.com [mailto:owner-teamgrumman-list-server(at)matronics.com] On Behalf Of teamgrumman(at)aol.com
Sent: Monday, March 01, 2010 11:30 AM
To: teamgrumman-list(at)matronics.com
Subject: The Baffle saga continues . . . . . damn it
Remember a few weeks ago when I said I picked up $4500 worth of baffles? There are 16 different baffles altogether. I had 10 pieces made of each one. When I picked them up, there were 13 sets of 10. I figured I'd miscounted and left it at that. I was excited just to get the baffles.
Turns out, the baffles for cylinders #2 and #4 and the baffle that holds the oil cooler were missing. I called, had them look up the baffles, and had them made. Another $1000.00.
Wouldn't you know. . . The CAD files baffles for cylinders #2 and #4 were some earlier files I created (well, I hired a CAD person to make the drawings for me) at the beginning of the drawing process. These drawings, somehow, got saved on a disk and handed off to another CAD person for the FAA redline corrections. So, for most of the time I was getting the drawings approved, I was holding drawings I thought were being approved and the second CAD guy was making changes to a different set of drawings. Something similar happened to the oil cooler baffle. Not quite as bad, but, still.
Then, more drama. The #3 baffle was made from a Van's RV6 baffle. My drawings were exact copies. In fact, I made a paper copy and glued it to the Van's and it fit. Turns out, the angle (on the bottom that displaces the upper portion away from the engine) on the Van's part is off by about 3 degrees. This is OK on the Van's install because his right rear baffle is kind of crudely bent into shape; final fit and trim is made by the installer. Unfortunately, the parts I'm having made are exactly how they are drawn. The #3 cylinder baffle won't nest into the right rear light it should. So, bottom line, the 10 #3 baffles and 10 right rear baffles I had made, are wrong.
For the last week I've been driving to the Bay Area to work with the CAD guy at the fabricators and driving to Folsom to work with the CAD guy that made the baffles in the first place. All the drawings were finalized yesterday, Sunday.
Good news is, the cowling is mounted on the plane and it's waiting for baffles.
No virus found in this incoming message.
Checked by AVG - www.avg.com
23:34:00
[quote][b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
