 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
william(at)gbta.net
Guest
|
 Posted: Tue Mar 09, 2010 4:54 pm Post subject: Outboard leading edge ribs--got it |
 |
|
It got the best of me so I went out and looked at things again. Turns out I've got two right wing skins--but were labeled correctly (left and right). Explains why the ribs called out for the left wing didn't fit. Anyway, Ken at Vans has a new left skin on the way.
Thanks for your help, again,
Bill
From: Rick (ricksked(at)cox.net)
Sent: Tuesday, March 09, 2010 1:05 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RE: Outboard leading edge ribs
To clarify my comment on the flange pointing inboard, was only at the tip, not the root or tank side.
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Seano
Sent: Tuesday, March 09, 2010 8:25 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Outboard leading edge ribs
I remember that too. There are left and right ribs on EACH wing.
| Quote: |
----- Original Message -----
From: Rene Felker (rene(at)felker.com)
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Sent: Tuesday, March 09, 2010 8:06 AM
Subject: RE: RV10-List: Outboard leading edge ribs
This may not be the problem. But the Ribs are “Numbered” Left and Right based on the direction of the flange and not the wing they are in….if I remember right. So, W-1009L does not necessarily go in the left wing. This is just a memory items for me, but it is something to check……I can’t even remember which wing the drawings are for, but check to make sure you got the correct L/R rib for the correct wing…..
Thinking about it…..the flange direction may not even affect the hole alignment?
Rene
801-721-6080
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Billy & Tami Britton
Sent: Tuesday, March 09, 2010 7:40 AM
To: rv10-list(at)matronics.com
Subject: Outboard leading edge ribs
Has anyone had an issue with the fitting of the outboard leading edge ribs into the skin? For example, on page 17-3 figure 1, the outboard w-1009R rib is pictured going into the skin with the flanges facing inboard. Mine is backwards and flanges have to be facing outboard to line the holes up. I checked one of the W-1009L inboard ribs also and it, too, is backwards. I've tried making sure I didn't get the right/left skins switched but that didn't matter. I also checked Tim O's site for gotchas and couldn't find anything mentioned as well as plans revisions on the home site. Nothing mentioned anywhere makes me wonder if I'm not just overlooking something obvious. Any suggestions?
Bill
| Quote: | | http://www.matronics.com/Navigator?RV10-Listhttp://forums.matronics.comhttp://www.matronics.com/contribution href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-Listhref="http://forums.matronics.com">http://forums.matronics.com |
0 |
123456789 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
0 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
1 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
2 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
3 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
4 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
5 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
6 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
7 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
8 | Quote: | | http://www.matronics.com/Navigator?RV10-List |
9 | Quote: | | http://forums.matronics.com |
0
| Quote: | | http://forums.matronics.com |
1 | Quote: | | http://forums.matronics.com |
2 [quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
