Matronics Email Lists :: View topic - Bob, Question on your WigWag flasher using a flasher relay

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Bob, Question on your WigWag flasher using a flasher relay

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Sat Mar 13, 2010 12:44 pm Post subject: Bob, Question on your WigWag flasher using a flasher relay

At 10:00 AM 3/12/2010, you wrote:

 	  Quote: 	
		  



Bob,



On page 3.0 of your diagram on the single switch solution to a wig 

wag using the flasher relay.....



You state that we can use a 15 amp breaker and 16awg wire for up 

to  2ea 100w lamps.



Is this correct or a typo?  Since when not in wigwag mode the full 

combined current will flow thru one 16awg wire, this seams to breaks 

some rules????


	


   Good catch. Those drawings were done so long ago

   that I don't now recall the reasoning behind

   the suggestions. Obviously, not finely tuned.



   I'll get them fixed in the not too distant future.

   Thanks for the heads-up.



   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum