Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

high CHTs

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
pitts_pilot(at)bellsouth.
Guest





PostPosted: Mon Mar 29, 2010 7:11 pm    Post subject: high CHTs Reply with quote

Start with the simple things ..... check for flashing between the fins
around the spark plug .... place a light underneath the head and look
down between the fins. best done when it's almost dark. A needle file
will clean up the flashing.

Check the sealing around the nose of the engine.

The intake air can also go forward and exit through the spinner/cowl
gap. Use a piece of foam pipe insulation fitted inside the cowl lip
.... the first time you start the engine it'll trim the foam so glue it
in well.

airflow efficiency ...... the differential pressures across the engine
need to be 6 1/2 " H2O for an O-360. Rig a manometer (Google manometer
if you don't know) and go fly. Balancing the inlet Vs outlet can cut
down cooling drag along with getting the temps down.

Also Google 'lycoming manometer' for far more reading than you want.

Let us know what you find out.
Linn
Take a good look at the baffle seal around the nose of the engine.
I've been struggling with high cylinder head temperatures for 2+
years...I have tried everything. Stock RV cowling & exhaust
installation: TMX-O360 180hp with Carb, Lightspeed & slick mag. I can
see CHT's in 430F range or much higher if I did NOT manage power.
Mixture & timing correct. Openned up intake & exhaust areas. Resealed
w/silicone material (replaced black stuff) - tight fit. Plugged all the
little holes w/red RTV. Sealed & recontoured in-let ramps. Spark plugs
the coolest offered...I am measureing with Dynon FlightDek 180 and all
TCs match exactly & agree with ambient temperature (0 to 100 F).
Everyone that looks at it says "looks good, shold cool OK?". I am
running out of ideas and would appreciate any feedback or ideas.
Thanks...Tony


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group