Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

cooling

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
pitts_pilot(at)bellsouth.
Guest





PostPosted: Tue Mar 30, 2010 5:16 am    Post subject: cooling Reply with quote

David Cudney wrote:
Quote:
After you have sealed as much as you can --If you still have a cooling
problem you, might consider louvers. Particularly if you have yet to
paint the plane. I was worried about cooling with my io 360 so I
built in louvers when I built my plane. It runs almost too cool -- I
have to block about 80% of the oil cooler in the winter in SoCAL. No
problem with heat even on hot, summer days at gross weight and climbing.

good luck
dave
IMHO, if the addition of louvers helps so much, then the cooling problem

is either not enough exit area, or the airflow path is significantly
turbulent. I'm sure that venturi effect helps suck the air out through
the louvers, so some venturi work on the exit might help.
Linn


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
bobbyhester(at)newwavecom
Guest





PostPosted: Tue Mar 30, 2010 5:49 pm    Post subject: cooling Reply with quote

My guess is that he would not have had cooling problems to start with. I
added louvers and they do not seem to have helped much.

----
Surfing the web from Hopkinsville, KY
Visit my web site:
http://home.newwavecomm.net/bobbyhester/RVSite.htm

Linn Walters wrote:
Quote:


David Cudney wrote:
> After you have sealed as much as you can --If you still have a
> cooling problem you, might consider louvers. Particularly if you have
> yet to paint the plane. I was worried about cooling with my io 360
> so I built in louvers when I built my plane. It runs almost too
> cool -- I have to block about 80% of the oil cooler in the winter in
> SoCAL. No problem with heat even on hot, summer days at gross weight
> and climbing.
>
> good luck
> dave
IMHO, if the addition of louvers helps so much, then the cooling
problem is either not enough exit area, or the airflow path is
significantly turbulent. I'm sure that venturi effect helps suck the
air out through the louvers, so some venturi work on the exit might help.
Linn


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group