spectrasalesllc(at)gmail. Guest
|
Posted: Thu Apr 01, 2010 4:46 am Post subject: Zenith601-List Digest: 5 Msgs - 03/30/10 |
|
|
ZENITH 601HDS FOR SALE/TRADE:
Professionally construction, temperfoam seats, EA-81 w/ Warp
Drive prop, GR-EIS, aux. wing fuel, center Y stick, cabin heat, all constuction manuals/documentation. Very clean. If interested,
call 803-753-0172. Leave message if I am working. Michael.
On Wed, Mar 31, 2010 at 2:58 AM, Zenith601-List Digest Server <zenith601-list(at)matronics.com (zenith601-list(at)matronics.com)> wrote:
[quote]*
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Zenith601-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith601-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2010-03-30&Archive=Zenith601
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2010-03-30&Archive=Zenith601
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Zenith601-List Digest Archive
---
Total Messages Posted Tue 03/30/10: 5
----------------------------------------------------------
Today's Message Index:
----------------------
1. 03:33 PM - Re: Zenith601-List Digest: 2 Msgs - 03/29/10 (gpjann1(at)netzero.com (gpjann1(at)netzero.com))
2. 04:44 PM - Wing Support points (Damien)
3. 05:34 PM - Re: Wing Support points (Larry McFarland)
4. 06:48 PM - Re: Wing Support points (Michel Therrien)
5. 07:25 PM - Re: Wing Support points (Damien)
________________________________ Message 1 _____________________________________
Time: 03:33:56 PM PST US
From: "gpjann1(at)netzero.com (gpjann1(at)netzero.com)" <gpjann1(at)netzero.net (gpjann1(at)netzero.net)>
Subject: Re: Zenith601-List Digest: 2 Msgs - 03/29/10
Does anyone have Zodiac 601 HDS LE fuel tanks for sale?
Also looking for 8 gal. header tank.
Thanks,
Greg
770-277-1637
gpjann1(at)netzero.com (gpjann1(at)netzero.com)
____________________________________________________________
Staples® - Weekly Ad
Incredible deals at Staples! Buy 1 get 1 case paper and much more!!
http://thirdpartyoffers.netzero.net/TGL3241/4bb27bcc6a4c1e4d0st01vuc
________________________________ Message 2 _____________________________________
Time: 04:44:11 PM PST US
From: "Damien" <dgraham7(at)TWCNY.RR.COM (dgraham7(at)TWCNY.RR.COM)>
Subject: Wing Support points
Hello. Where are the sections on a 601 HDS wing that will support the
plane underneath? I plan on replacing the nose bungee and in addition to
tying
down the tail and lifting up on the engine, I would like to place a
support under each wing in case of failure. My guess is that the support
point would be under the
area where we walk on the wing.
Regards,
Damien
________________________________ Message 3 _____________________________________
Time: 05:34:49 PM PST US
From: Larry McFarland <larry(at)macsmachine.com (larry(at)macsmachine.com)>
Subject: Re: Zenith601-List: Wing Support points
Hi Damien,
I made a set of wing stands to do the job. The wings were off when I did
these, but you could make a set that supports the spar area
as shown here. You may have to adjust the angle a bit, but I replaced
bungees one at a time while on this rig. Lift the airplane, set in the pin.
or just place the support under the spar.
See attached image.
Larry McFarland
Damien wrote:
Quote: | Hello. Where are the sections on a 601 HDS wing that will support the
plane underneath? I plan on replacing the nose bungee and in addition
> to tying
|
Quote: | down the tail and lifting up on the engine, I would like to place a
support under each wing in case of failure. My guess is that the
support point would be under the
area where we walk on the wing.
> Regards,
|
________________________________ Message 4 _____________________________________
Time: 06:48:27 PM PST US
From: Michel Therrien <mtherr(at)yahoo.com (mtherr(at)yahoo.com)>
Subject: Re: Wing Support points
Not sure what you mean, but if it is to put the plane on saw horses or some
thing like that, I'd say that anywhere under the main spar should be good (
main rivet line underneath)... at least, this is the case for the 601 HD.
-
-
Here is a not so fun example...:
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601
http://pages.infinit.net/mthobby
--- On Tue, 3/30/10, Damien <dgraham7(at)TWCNY.RR.COM (dgraham7(at)TWCNY.RR.COM)> wrote:
From: Damien <dgraham7(at)TWCNY.RR.COM (dgraham7(at)TWCNY.RR.COM)>
Subject: Wing Support points
Received: Tuesday, March 30, 2010, 7:43 PM
Hello. Where are the sections on a 601 HDS wing that will support the plane
underneath? ....=0A=0A=0A ___________________________________________
_______________________=0AYahoo! Canada Toolbar: Search from anywhere on th
e web, and bookmark your favourite sites. Download it now=0Ahttp://ca.toolb
ar.yahoo.com.
________________________________ Message 5 _____________________________________
Time: 07:25:35 PM PST US
From: "Damien" <dgraham7(at)TWCNY.RR.COM (dgraham7(at)TWCNY.RR.COM)>
Subject: Re: Wing Support points
Thanks Michel and Larry. That is just what I needed. And thanks
for the photos too.
Regards,
Damien
DO NOT ARCHIVE
---
| - The Matronics Zenith601-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith601-List |
|
|
|