Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SD-8 Sink Point

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
longg(at)pjm.com
Guest





PostPosted: Thu Apr 01, 2010 7:09 am    Post subject: SD-8 Sink Point Reply with quote

My setup is based on Z13/8 and I've got an SD-8 which is wired per the
diagram back to the battery side of the contactor. That post has limited
threads available for the 2 thread safety margin I require. I would like
to determine if the SD8 output can be re-positioned.

Is there any issue with connecting the output from the SD8 to the
battery buss post instead of running it back to the battery side of the
solenoid which is exactly where the battery buss is coming from? Per the
diagram the output passes through a 10 amp shunt.

Thanks,

Glenn


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Thu Apr 01, 2010 9:50 am    Post subject: SD-8 Sink Point Reply with quote

At 10:05 AM 4/1/2010, you wrote:
Quote:


My setup is based on Z13/8 and I've got an SD-8 which is wired per the
diagram back to the battery side of the contactor. That post has limited
threads available for the 2 thread safety margin I require. I would like
to determine if the SD8 output can be re-positioned.

Is there any issue with connecting the output from the SD8 to the
battery buss post instead of running it back to the battery side of the
solenoid which is exactly where the battery buss is coming from? Per the
diagram the output passes through a 10 amp shunt.

Certainly wires can be moved around in terms of which
ends connect to where . . . as long as the pathways
of copper are still contiguous.

Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
longg(at)pjm.com
Guest





PostPosted: Thu Apr 01, 2010 12:23 pm    Post subject: SD-8 Sink Point Reply with quote

Thanks Bob. Move it shall be.

Glenn E. Long

Do Not Archive
--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group