 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
bcchurch
Joined: 10 Dec 2007
Posts: 25
Location: Racine, WI
|
 Posted: Sun Feb 22, 2009 3:46 pm Post subject: Olfa Knife - SEM pictures for the curious builder |
 |
|
Thought I'd share some pictures I took showing what an Olfa Knife does to aluminum.
Regards,
Ben Church
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
| Description: |
|
Download |
| Filename: |
Olfa.pdf |
| Filesize: |
1.3 MB |
| Downloaded: |
2649 Time(s) |
_________________
Ben Church
CH801
Racine, WI
Last edited by bcchurch on Thu Mar 19, 2009 3:40 pm; edited 1 time in total |
|
| Back to top |
|
 |
lwinger
Joined: 21 Jun 2006
Posts: 229
Location: Tustin, CA
|
| Posted: Sun Feb 22, 2009 4:07 pm Post subject: Olfa Knife - SEM pictures for the curious builder |
|
|
That's crazy. Where did you make the magnified images?
Larry Winger
650/Corvair
Fuselage ready to rivet
Tustin, CA
Do Not Archive
On Sun, Feb 22, 2009 at 3:46 PM, bcchurch <bcchurch(at)yahoo.com (bcchurch(at)yahoo.com)> wrote:
[quote]--> Zenith-List message posted by: "bcchurch" <bcchurch(at)yahoo.com (bcchurch(at)yahoo.com)>
Thought I'd share some pictures I took showing what an Olfa Knife does to aluminum.
Regards,
Ben
--------
Ben Church
CH801
Racine, WI
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=231561#231561
Attachments:
http://forums.matronics.com//files/olfa_198.pdf
List Un/Subscription,
://www.matronics.com/Navigator?Zenith-List" target="_blank">http://www.matronics.com/Navigator?Zenith-List
ref="http://forums.matronics.com/" target="_blank">http://forums.matronics.com
p; -Matt Dralle, List Admin.
=====
[b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
Larry Winger
Tustin, CA
Plans building 601XL/650 with Corvair
Installing fuel system
www.mykitlog.com/lwinger |
|
| Back to top |
|
|
bcchurch
Joined: 10 Dec 2007
Posts: 25
Location: Racine, WI
|
| Posted: Sun Feb 22, 2009 4:21 pm Post subject: Re: Olfa Knife - SEM pictures for the curious builder |
|
|
Larry,
Can't seem to spend my entire work day working...
I'm materials engineer and use electron microscopes on a regular basis. It's good practice for me to look at "non-routine" things from time to time - just to keep the skills sharp.
Regards,
Ben
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
Ben Church
CH801
Racine, WI |
|
| Back to top |
|
|
Ron Lendon
Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI
|
| Posted: Sun Feb 22, 2009 7:28 pm Post subject: Re: Olfa Knife - SEM pictures for the curious builder |
|
|
Ben,
Let us see what that edge looks like after working the edge with a vixen file, then again after all the burrs are removed.
Thanks,
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/ |
|
| Back to top |
|
|
PatrickW
Joined: 27 Oct 2006
Posts: 380
Location: Fort Worth, Texas
|
| Posted: Mon Feb 23, 2009 11:24 am Post subject: Re: Olfa Knife - SEM pictures for the curious builder |
|
|
There's some serious opportunity for learning here.
Would be interesting to see the differences between the various deburring techniques.
I can't help but to wonder what a reamed spar bolt hole would look like under extreme magnification. Or the contents of an oil filter after first engine startup. Or is Nuvite really the best polishing stuff.
The possibilities would be endless....
Any ideas on how much a good electron microscope costs? I wonder if a guy could build one?
- Patrick
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
Gig Giacona
Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA
|
| Posted: Mon Feb 23, 2009 12:48 pm Post subject: Re: Olfa Knife - SEM pictures for the curious builder |
|
|
| PatrickW wrote: |
Any ideas on how much a good electron microscope costs?
- Patrick |
To the first question http://www.technicalsalessolutions.com/
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR |
|
| Back to top |
|
|
thesumak(at)aol.com
Guest
|
| Posted: Mon Feb 23, 2009 4:05 pm Post subject: Olfa Knife - SEM pictures for the curious builder |
|
|
Maybe I can make a small contribution here: I spent much of my past life using an assortment of light and electron microscopes to help solve problems. While scanning electron microscopy is a powerful tool (as Ben so beautifully demonstrates) my favorite instrument has always been the simple stereomicroscope. Like SEM, these are used to study the surface of things. They have a large working distance and require no sample preparation. You can get a high quality used one or a low quality new one for a few hundred dollars. At home, mine gets used for removing splinters and what not. In the shop, I have used it to help make personal judgements on some of the issues we obsess about.
At my hanger, I use it to examine oil filters from my certificated ship. The good folks at Sacramento Sky Ranch provide good counsel on simple physical and chemical tests one can use to help identify unknown particles. (link below).
If you have kids around, the stereomicroscope is great for motivating them about science. Basically anything examined under a stereomicroscope is amusing, but biological stuff is best. For man made things, the closer you look, the more ragged it appears. For anything biological, the closer you look, the more wondrous it becomes.
Even cheaper and easier, I sometimes find that questions can be resolved by examination with cheap reading glasses with crazy high diopter. Helps my welding as well. Sorry for rambling.
Cheers,
Bill
Patrick said: Any ideas how much a good electron microscope costs?
http://www.sacskyranch.com/metfram.htm
Access 350+ FREE radio stations anytime from anywhere on the web. Get the Radio Toolbar!
[quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
samwise
Joined: 01 Apr 2010
Posts: 1
|
| Posted: Fri Apr 09, 2010 7:41 am Post subject: Re: Olfa Knife - SEM pictures for the curious builder |
|
|
Thanks for sharing some pictures of your knife. Very much impressed!
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
rambo knives |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
