Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Vixen File

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Albert Gardner

Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ

Posted: Sun Apr 25, 2010 5:52 pm Post subject: Vixen File

[quote]A Vixen file is the ideal tool for making those little spacers Van uses here and there. Since the end needs to be perpendicular to the axis, you clamp the Vizen file down on your drill press table, chuck the piece of tubing in the drill press chuck and lower it down onto the Vixen file. After that end is finished, measure it for length and reverse the piece in the chuck taking off the necessary amout to get the proper length. Albert GardnerN991RVYuma, AZ [b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV-9A N872RV
RV-10 N991RV

MauleDriver(at)nc.rr.com
Guest

Posted: Mon Apr 26, 2010 6:51 am Post subject: Vixen File

Nice!  Wish I knew/thought of that before now.



thanks.



Albert Gardner wrote:

 	  Quote: 	
		   *A Vixen file is the ideal tool for making those little spacers Van uses here and there. Since the end needs to be perpendicular to the axis, you clamp the Vizen file down on your drill press table, chuck the piece of tubing in the drill press chuck and lower it down onto the Vixen file. After that end is finished, measure it for length and reverse the piece in the chuck taking off the necessary amout to get the proper length. *

 *Albert Gardner*

 *N991RV*

 *Yuma, AZ*

 * *

 *

 *

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

indigoonlatigo(at)msn.com
Guest

Posted: Mon Apr 26, 2010 8:02 am Post subject: Vixen File

Me too!

 

 	  Quote: 	
		   Date: Mon, 26 Apr 2010 10:21:34 -0400

 From: MauleDriver(at)nc.rr.com

 To: rv10-list(at)matronics.com

 Subject: Re: Vixen File

 

 --> RV10-List message posted by: Bill Mauledriver Watson <MauleDriver(at)nc.rr.com>

 

 Nice! Wish I knew/thought of that before now.

 

 thanks.

 

 Albert Gardner wrote:

 > *A Vixen file is the ideal tool for making those little spacers Van uses here and there. Since the end needs to be perpendicular to the axis, you clamp the Vizen file down on your drill press table, chuck the piece of tubing in the drill press chuck and lower it down onto the Vixen file. After that end is finished, measure it for length and reverse the piece in the chuck taking off the necessary amout to get the proper length. *

 > *Albert Gardner*

 > *N991RV*

 > *Yuma, AZ*

 > * *

 > *

 >

 >

 > *

 

 

 

&gt======================
	


&gt======

[quote] 

 

 

 		 	   		     	  Quote: 	
		  [b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum