 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Strasnuts
Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT
|
 Posted: Tue May 11, 2010 5:43 am Post subject: paint thickness? |
 |
|
Just curious how much material (roughly) to remove between the door and the cabin for paint. I have a flush fit with no gap now.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours |
|
| Back to top |
|
 |
Tim Olson
Joined: 25 Jan 2007
Posts: 2872
|
| Posted: Tue May 11, 2010 11:07 am Post subject: paint thickness? |
|
|
You'll probably have to use your best guess, but, I'd leave something
like 1/8" or more. You don't want that seam to be ultra
flush when you're done. Let the door seal do it's work and
give it an 1/8 or more. Besides, if you later fabric cover
the door (which is nice and quieter), you will want even more gap.
Tim Olson - RV-10 N104CD
do not archive
Strasnuts wrote:
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Jim Berry
Joined: 10 Jan 2006
Posts: 237
Location: Denver
|
| Posted: Tue May 11, 2010 12:45 pm Post subject: Re: paint thickness? |
|
|
My paint guru said to allow at least 0.020" gap. A properly applied paint job on both sides will fill approximately half of that, leaving a final gap of about 0.010".
Jim Berry
40482
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Deems Davis
Joined: 09 Jan 2006
Posts: 925
|
| Posted: Tue May 11, 2010 4:24 pm Post subject: paint thickness? |
|
|
That's pretty tight IMO. A lot will depend on your painter, and whether you use a single stage paint or base/clear/ different painters prefer different coverages. I allowed between 1/16 - 3/32, and in a couple of places its just barely enough (base/clear paint job).
Deems Davis
N519PJ
www.deemsrv10.com
On 5/11/2010 1:45 PM, Jim Berry wrote: [quote] [b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Strasnuts
Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT
|
| Posted: Tue May 11, 2010 4:42 pm Post subject: paint thickness? |
|
|
Thanks. I will be having base/clear paint. I will shoot for .080.
Sent from my iPhone
On May 11, 2010, at 18:19, Deems Davis <deemsdavis(at)cox.net (deemsdavis(at)cox.net)> wrote:
[quote] That's pretty tight IMO. A lot will depend on your painter, and whether you use a single stage paint or base/clear/ different painters prefer different coverages. I allowed between 1/16 - 3/32, and in a couple of places its just barely enough (base/clear paint job).
Deems Davis
N519PJ
www.deemsrv10.com
On 5/11/2010 1:45 PM, Jim Berry wrote: | Quote: | | Quote: | --> RV10-List message posted by: "Jim Berry" <[url=mailto:jimberry(at)qwest.net]jimberry(at)qwest.net (jimberry(at)qwest.net)>[/url]
My paint guru said to allow at least 0.020" gap. A properly applied paint job on both sides will fill approximately half of that, leaving a final gap of about 0.010".
Jim Berry
40482
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=297400#297400
|
|
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours |
|
| Back to top |
|
|
robin(at)PaintTheWeb.com
Guest
|
| Posted: Tue May 11, 2010 4:47 pm Post subject: paint thickness? |
|
|
I personally prefer a wide gap that has an even, constant spread in the gap (door gap, cowl gap) than a tighter gap that is not even.
I wish I had followed my own advice on the baggage door. It's a bit too tight.
Robin
Sent from my iPadWahoo!
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
