Matronics Email Lists :: View topic - IVO Prop Motor Current Limiter and Electronic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

IVO Prop Motor Current Limiter and Electronic

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

Dennis Glaeser

Joined: 10 Jan 2006
Posts: 53
Location: Rochester Hills, Michigan

Posted: Thu May 13, 2010 4:38 pm Post subject: IVO Prop Motor Current Limiter and Electronic

The instructions do say not to shorten the wires. 

 	  Quote: 	
		  From a support standpoint, it makes sense for IVO to specify that no changes

be made to the system they know works as advertised.
	


 	  Quote: 	
		  From a physics standpoint, a couple of feet of 16AWG wire isn't going to

measurably affect the current to the motor or when that CB trips.  If
	


anything, less wire should mean more current and make the breaker trip

quicker.

(Not everyone follows the instructions)



Dennis



----------------------------

Is it true that IVO insists that the supplied wiring to the prop not be 

shortened as it is part of the current limiting to protect the motor gears?

Ken

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum