Matronics Email Lists :: View topic - Ground power contactor diodes

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Ground power contactor diodes

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Sun May 16, 2010 6:12 am Post subject: Ground power contactor diodes

 	  Quote: 	
		  Comments/Questions: I purchased a pre wired contactor from B&C for 

ground power,when I received it I found it had one diode #IN5400 on 

the two short post and a wire on one small post to one of the large 

post, question is you have two Radio Shack diodes #IN5402 on your 

drawing do I need to change the wiring and put the two Radio Shack 

diodes on or will it work like it is. Thanks for any information.


	


   It will 'work' as received. Adding the second diode offers

   some protection against the rare instance of reversed

   polarity from a ground power source. Adding it is your

   choice.



   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum