Matronics Email Lists :: View topic - Belly / float mount reinforcement

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Belly / float mount reinforcement

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

Richard Rabbers

Joined: 09 Jan 2006
Posts: 114
Location: Benton Harbor, MI - USA

Posted: Thu Aug 24, 2006 4:13 am Post subject: Belly / float mount reinforcement

I recently received some info from a model 3 pilot flying Full Lotus floats.



He relayed " One item that was needed for floats on the models 1 through 3 is a brace across the bottom that I purchased from Skstar. "



I'd not heard of this before. 

Does anyone have any knowledge or feel a need for reinforcement like this?

- see photo attached.



Thanks

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Belly-gear-reinforcement.jpg

Description:

Filesize:

59.22 KB

Viewed:

678 Time(s)

_________________
Richard in SW Michigan
Model 1 / 618 - full-lotus floats (restoration)

dave(at)cfisher.com
Guest

Posted: Thu Aug 24, 2006 5:06 am Post subject: Belly / float mount reinforcement

Richard,



no photo attached ?



I have a brand new set of Full lotus at my shop now being  installed on a 

beaver .

Let me know if you need pics.



I do have the aerocet install info as well.

dave

---

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

morid(at)northland.lib.mi
Guest

Posted: Thu Aug 24, 2006 6:30 am Post subject: Belly / float mount reinforcement

It appears that Skystar engineering felt this area needed some extra

strength.

Deke



 	  Quote: 	
		   



 I recently received some info from a model 3 pilot flying Full Lotus

floats.
	


 	  Quote: 	
		  

 He relayed " One item that was needed for floats on the models 1 through 3

is a brace across the bottom that I purchased from Skstar. "
	


 	  Quote: 	
		  

 I'd not heard of this before.

 Does anyone have any knowledge or feel a need for reinforcement like this?

 - see photo attached.



 Thanks



 --------

 Richard in SW Michigan

 Model 1 / 618 - full-lotus floats (restoration)

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Richard Rabbers

Joined: 09 Jan 2006
Posts: 114
Location: Benton Harbor, MI - USA

Posted: Thu Aug 24, 2006 6:35 am Post subject: Belly / float mount reinforcement

Dave relayed that my photo attachment (sent via web view) did not come through.

   

  I'll dupicate my question here and try the attachment via Email.

   

  I recently received some info from a model 3 pilot flying Full Lotus floats.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

  He relayed " One item that was needed for floats on the models 1 through 3 is a brace across the bottom that I purchased from Skstar. "

   

  I'd not heard of  this before.

  Does anyone have any knowledge or feel a need for einforcement like this?

  - see photo attached.

   

  Thanks!

   

  Richard - Model 1, 618, Full Lotus floats - Benton Harbor MI.

   

  Richard

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Belly-gear-reinforcement.jpg

Description:

Filesize:

59.22 KB

Viewed:

624 Time(s)

_________________
Richard in SW Michigan
Model 1 / 618 - full-lotus floats (restoration)

Richard Rabbers

Joined: 09 Jan 2006
Posts: 114
Location: Benton Harbor, MI - USA

Posted: Thu Aug 24, 2006 6:43 am Post subject: Re: Belly / float mount reinforcement

 	  Quote: 	
		  no photo attached ? 	




Dave,



The photo shows up in the forum link  http://forums.matronics.com/viewtopic.php?p=56936#56936 where I generated my question. I also received the attachement when I received my posting via Email.  I'll try again via Email to the list.



 	  Quote: 	
		   I have a brand new set of Full lotus at my shop now being  installed on a beaver . Let me know if you need pics. 	




Yes....I'd love to see photos of your installations or parts/mounts.

It seem fairly basic and I know my needs are not unlike others - low weight + required strength. My model 1 low gross lives no room for excess.



Thanks!

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Richard in SW Michigan
Model 1 / 618 - full-lotus floats (restoration)

dave(at)cfisher.com
Guest

Posted: Thu Aug 24, 2006 6:57 am Post subject: Belly / float mount reinforcement

Richard,

  

 I have not seen this brace before but I would  certainly make one up if it called for. 

 Looks like a decent stiffner. 

 Now that is on front float gear attachment  fittings.   So Why would they not have one on the rear attach fittings  as ther is more load there plus the added wing struts attach there as well.  

 I know some of the earlier Kitfoxes  that is  was a weak spot , expecially on hard landings. 

  

  

  

 Dave 

  

  

  

 [quote]   ---

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Float Flyr

Joined: 19 Jul 2006
Posts: 2704
Location: Campbellton, Newfoundland

Posted: Thu Aug 24, 2006 7:30 am Post subject: Belly / float mount reinforcement

I have that brace on my plane.  as well as a strake under the vertical stabilizer.   You can hit  pretty hard if there is a decent wave at all so the brace seems ok to  me.

  

  

 

Noel [quote]   

   --

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Noel Loveys
Kitfox III-A
Aerocet 1100 Floats

Richard Rabbers

Joined: 09 Jan 2006
Posts: 114
Location: Benton Harbor, MI - USA

Posted: Thu Aug 24, 2006 8:16 am Post subject: Re: Belly / float mount reinforcement

 	  Quote: 	
		   Noel sez: I have that brace on my plane 	


I'm glad to hear about this support at this point 'prior to mounting'.



 	  Quote: 	
		  Deke sez: It appears that Skystar engineering felt this area needed some extra strength. 	


Yep, I guess so.



 	  Quote: 	
		  Dave sez: So Why would they not have one on the rear attach fittings as there is more load there plus the added wing struts attach there as well. 	


I'm curious also.



I welcome other input or experience.

Thanks!

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Richard in SW Michigan
Model 1 / 618 - full-lotus floats (restoration)

dholly

Joined: 19 Dec 2006
Posts: 40
Location: Upstate NY

Posted: Thu May 20, 2010 7:39 am Post subject: Re: Belly / float mount reinforcement

If anyone has a float brace for sale please contact me offline. Thanks in advance. -Doug



[edit] Found one, thanks Ron.

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
-Kitfox III 582 Blue/C Grove Spring / Aerocet 1100 Amphibs
-Airdale Avid+ (project) TD / W.I.B. Gear

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum