Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Bouncing ammeter

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

j.eastveld(at)sympatico.c
Guest

Posted: Wed Jun 09, 2010 7:07 am Post subject: Bouncing ammeter

Bob

  

 My RV-4. In the effort to cure the, recently started,  bouncing ammeter guage I have had the Nippon Denso 30 amp alternator  rebuilt, installed a new VR-166 regulator, checked and cleaned the battery  ground but a few minutes after start up the ammeter needle still bounces  0-18 amps every 1 to 2 seconds. I switch on radios, transponder, landing light,  navigation lights and strobes. The amp needle steadies for a minute or two  then starts bouncing again. Is this OK because it says regulator is  working.

  

 John Eastveld

  

 j.eastveld(at)sympatico.ca (j.eastveld(at)sympatico.ca)

   [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum