Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Vernatherm

Matronics Email Lists Forum Index -> Glasair-List

View previous topic :: View next topic

Author Message

Craymondw(at)aol.com
Guest

Posted: Thu Jul 01, 2010 4:53 am Post subject: Vernatherm

This is a heads up: I discovered Lycoming's new vernatherm valve presses  against the  drain stop cylinder valve located in the accessory case that  the oil screen housing is bolted too. You can see the cylinder by looking into  the hole that the vernatherm valve seats against when the oil reaches 180  degrees. If the valve presses against that cylinder it not only prevents  that cylinder from opening, it also jams the vernatherm valve as it expands. I  found that I had to file off a little under 3/32" off the threaded shaft and  crimping nut for it to clear. 

  

                                                                  Chuck Raymond Glasair 16CD

  [quote][b]

- The Matronics Glasair-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Glasair-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Glasair-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum