Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

John Deere AM101406

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

gordonrsmith921@yahoo.com

Joined: 06 Oct 2009
Posts: 24

Posted: Thu Jun 24, 2010 7:43 am Post subject: John Deere AM101406

I wanted to purchase a JD AM101406 for use as a Voltage Regulator controller for a 20A. PM alternator installation.  It has been touted as a “Robust” option for replacement of other regulator units.  

   

I made a purchase over the internet and received a unit Identified only as VR-150 Made In China.  It has very little cooling fin area as compared to the pictured Stens 435-159 version of the AM101406.  Please see attached photos of both units.  

   

Should the generic VR-150 be considered an adequate substitute for the robust Stens 435-159 unit?  

   

I found that there are many internet sources for the Stens unit that are out of stock and will not be reordering, just no longer available.  I don’t know what this means.  

   

Gordon Smith

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Stens_435-159.jpg

Description:

Filesize:

10.94 KB

Viewed:

4836 Time(s)

VR-150_(made_in_China).jpg

Description:

Filesize:

25.57 KB

Viewed:

4836 Time(s)

jdabney(at)rice.edu
Guest

Posted: Thu Jun 24, 2010 10:03 am Post subject: John Deere AM101406

Gordon,



I bought an aftermarket regulator that also seemed a bit flimsy. It 

couldn't handle the current. The result is attached. When it melted, the 

stench was terrible.



I did find in Houston a source (a tractor parts company) for the genuine 

Kubota part identical to the regulator that came with my Jabiru 2200. 

Also, I installed a 1" tube coming from the Jabiru cylinder head duct 

blowing directly on the regulator, and haven't had any more trouble.



Jim Dabney



Gordon Smith wrote:

 	  Quote: 	
		  

 I wanted to purchase a JD AM101406 for use as a Voltage Regulator 

 controller for a 20A. PM alternator installation. It has been touted 

 as a “Robust” option for replacement of other regulator units.



 I made a purchase over the internet and received a unit Identified 

 only as VR-150 Made In China. It has very little cooling fin area as 

 compared to the pictured Stens 435-159 version of the AM101406. Please 

 see attached photos of both units.



 Should the generic VR-150 be considered an adequate substitute for the 

 robust Stens 435-159 unit?



 I found that there are many internet sources for the Stens unit that 

 are out of stock and will not be reordering, just no longer available. 

 I don’t know what this means.



 Gordon Smith

 ------------------------------------------------------------------------

 ------------------------------------------------------------------------

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

P1010102T.JPG

Description:

Filesize:

175.48 KB

Viewed:

4835 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum