Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

ov module

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

icubob(at)gmail.com
Guest

Posted: Tue Jun 22, 2010 10:44 am Post subject: ov module

hi bob,

  i am labeling my panel and have a somewhat dumb question........what to label the warning light that goes on if the ov s tripped?  low voltage? alternator off line?

   i guess i am not sure what to label the 20 amp breaker in this system that takes the alt. off line.

  thanks, bob noffs

  [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Tue Jun 22, 2010 12:29 pm Post subject: ov module

At 12:49 PM 6/22/2010, you wrote:

 	  Quote: 	
		  hi bob,

  i am labeling my panel and have a somewhat dumb 

 question........what to label the warning light that goes on if the 

 ov s tripped?  low voltage? alternator off line?


	


    LO VOLTS



  Doesn't matter why it's on, it can turn

  on for a variety of reasons including an

  ov trip.



 	  Quote: 	
		     i guess i am not sure what to label the 20 amp breaker in this 

 system that takes the alt. off line.

  thanks, bob noffs


	


   ?? 20A  ??? which breaker is this ??



   Is this the b-lead breaker for a PM alternator?

   If so, label it



   ALT

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

icubob(at)gmail.com
Guest

Posted: Tue Jun 22, 2010 3:41 pm Post subject: ov module

yes bob, it is the breaker that the ov mod opens. thanks for the replys, bob noffs



 On Tue, Jun 22, 2010 at 3:30 PM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:

 [quote]--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)>  



At 12:49 PM 6/22/2010, you wrote:

  	  Quote: 	
		  hi bob,

 i am labeling my panel and have a somewhat dumb question........what to label the warning light that goes on if the ov s tripped?  low voltage? alternator off line?

 	




  LO VOLTS



 Doesn't matter why it's on, it can turn

 on for a variety of reasons including an

 ov trip.  



  	  Quote: 	
		   i guess i am not sure what to label the 20 amp breaker in this system that takes the alt. off line.

 thanks, bob noffs

 	




 ?? 20A  ??? which breaker is this ??



 Is this the b-lead breaker for a PM alternator?

 If so, label it



 ALT

 Bob . . . 

  

 st Un/Subscription,

 www.matronics.com/Navigator?AeroElectric-List" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ronics.com/" target="_blank">http://forums.matronics.com

 Matt Dralle, List Admin.

 =====



[b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Tue Jun 22, 2010 5:13 pm Post subject: ov module

At 06:40 PM 6/22/2010, you wrote:

 	  Quote: 	
		  yes bob, it is the breaker that the ov mod opens. thanks for the 

replys, bob noffs


	




    I'm not sure what this breaker is. There are no AeroElectric

    drawings that show a breaker greater than 5A associated with

    a crowbar ov protection system.



    Are you using a Z-figure? What kind of alternator.

    Where is the breaker located in the system?

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

icubob(at)gmail.com
Guest

Posted: Wed Jun 23, 2010 2:03 am Post subject: ov module

bob,

  ok,

  i wlll have to check out the wiring. it has been several years since i wired. i have to do two 12 hrs shifts today and tomorrow. i will get back on friday. it is on a jab 3300 and i pretty much followed a z drawing.

   bob noffs

 On Tue, Jun 22, 2010 at 8:15 PM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:

 [quote] --> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)>

 At 06:40 PM 6/22/2010, you wrote:

  	  Quote: 	
		  yes bob, it is the breaker that the ov mod opens. thanks for the replys, bob noffs

	




 

  I'm not sure what this breaker is. There are no AeroElectric

  drawings that show a breaker greater than 5A associated with

  a crowbar ov protection system.



  Are you using a Z-figure? What kind of alternator.

   Where is the breaker located in the system?   

 s.com/Navigator?AeroElectric-List" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ronics.com/" target="_blank">http://forums.matronics.com

 Matt Dralle, List Admin.

 =====



[b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Jun 23, 2010 4:47 am Post subject: ov module

At 05:01 AM 6/23/2010, you wrote:

 	  Quote: 	
		  bob,

  ok,

  i wlll have to check out the wiring. it has been several years 

 since i wired. i have to do two 12 hrs shifts today and tomorrow. i 

 will get back on friday. it is on a jab 3300 and i pretty much 

 followed a z drawing.

  bob noffs


	


   Understand. The only Jab drawing I've published

   is



http://www.aeroelectric.com/PPS/Adobe_Architecture_Pdfs/Z20L.pdf



   which shows suggested labels and sizes for the

   components you've asked about. But don't hurry,

   you're going to need some SLEEP after taking care

   of the tasks for today . . .



   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

icubob(at)gmail.com
Guest

Posted: Fri Jun 25, 2010 3:33 pm Post subject: ov module

 hi bob,

  i mailed you a few days ago about how to label the warning light and 20amp breaker in my ov module.

  this is on a jab 3300. i am looking at b and c diagrahm  and for some reason when i ordered the parts from them a 20 amp breaker was substituted for a 10 or 15 amp breaker and a 1 amp was substituted for the 2 amp. you had questioned what a 20 amp breaker was doing in there. my answer to that is i have no idea. will the system work with the 20 amp and the 1 amp? 

    i have a toggle for ''master on ''but no separate switch for the alternator.

   

    bob noffs

  [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Sat Jun 26, 2010 3:54 am Post subject: ov module

At 06:27 PM 6/25/2010, you wrote:

 	  Quote: 	
		    hi bob,

  i mailed you a few days ago about how to label the warning light 

 and 20amp breaker in my ov module.

  this is on a jab 3300. i am looking at b and c diagrahm  and for 

 some reason when i ordered the parts from them a 20 amp breaker was 

 substituted for a 10 or 15 amp breaker and a 1 amp was substituted 

 for the 2 amp. you had questioned what a 20 amp breaker was doing 

 in there. my answer to that is i have no idea. will the system work 

 with the 20 amp and the 1 amp?

   i have a toggle for ''master on ''but no separate switch for the 

 alternator.


	


   I'm not familiar with B&C's diagram for wiring a Jab.

   Can you point me to a download link for it or send

   me an electronic copy if it's already in .pdf?



   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum