 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Fergus Kyle
Joined: 03 Jun 2007
Posts: 291
Location: Burlington ON Canada
|
 Posted: Mon Jul 26, 2010 8:34 am Post subject: Coolant temperature sensor |
 |
|
Good day,
Perhaps I need a logic translator to prescribe the directions I read from the following: (legal ramifications are NOT involved here)
In the Rotax 914 series Installation Manual sits a table on page 48/01JUL’08, above which the following text is set:
“Depending on the achieved maximum values of the cylinder head temperature and the coolant temperature following action are necessary.”
The table then exhibits ‘maximum values for Coolant temperature and cylinder head temperature’, under which for certain values the corrective action is “Additional instruments for displaying coolant temperature is necessary....”
Am I wrong or do I need to install a coolant temperature sensor to see if I need to install a coolant temperature sensor?
I’m sorry to disturb otherwise normal activity to address this logic twist, but I would appreciate any response applicable......
Cheers, Ferg [quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
brian.davies(at)clara.co.
Guest
|
| Posted: Mon Jul 26, 2010 11:34 am Post subject: Coolant temperature sensor |
|
|
EER! Yes!
Actually, having recently carried out this exercise, the difference between the two temps is so small that it is not worth fitting a coolant temp sensor (IMHO).
Brian Davies
Do not archive
From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of Fergus Kyle
Sent: 26 July 2010 17:28
To: 5EUROPALIST ; 1ROTAXnet
Subject: Coolant temperature sensor
Good day,
Perhaps I need a logic translator to prescribe the directions I read from the following: (legal ramifications are NOT involved here)
In the Rotax 914 series Installation Manual sits a table on page 48/01JUL’08, above which the following text is set:
“Depending on the achieved maximum values of the cylinder head temperature and the coolant temperature following action are necessary.”
The table then exhibits ‘maximum values for Coolant temperature and cylinder head temperature’, under which for certain values the corrective action is “Additional instruments for displaying coolant temperature is necessary....”
Am I wrong or do I need to install a coolant temperature sensor to see if I need to install a coolant temperature sensor?
I’m sorry to disturb otherwise normal activity to address this logic twist, but I would appreciate any response applicable......
Cheers, Ferg[quote]
href="http://www.matronics.com/Navigator?Europa-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
[b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
Brian Davies
Joined: 10 Jan 2006
Posts: 124
Location: uk
|
| Posted: Tue Jul 27, 2010 4:55 am Post subject: Coolant temperature sensor |
|
|
Just one further point. Paul Mitchell has just reminded me that in the UK, the LAA have decided we must have both gauges fitted if we run 50:50.
Fortunately, I have run Evans since day one and have experienced no problems.
Regards
Brian
From: Brian Davies [mailto:brian.davies(at)clara.co.uk]
Sent: 26 July 2010 20:32
To: 'europa-list(at)matronics.com'
Subject: RE: Coolant temperature sensor
EER! Yes!
Actually, having recently carried out this exercise, the difference between the two temps is so small that it is not worth fitting a coolant temp sensor (IMHO).
Brian Davies
Do not archive
http://www.matronics.com/c=================
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
