Matronics Email Lists :: View topic - Kolb-List Digest: 20 Msgs

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Kolb-List Digest: 20 Msgs - 04/27/06

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

vicw(at)vcn.com
Guest

Posted: Fri Apr 28, 2006 10:38 am Post subject: Kolb-List Digest: 20 Msgs - 04/27/06

For soldering cables I made a solder pot out of 3/4 inch diameter pipe about 

1 inch long welded to a flat piece of steel.  Make it leak proof.  I filled 

it with silver solder and I heat it up with a propane torch until the solder 

is liquid.  I dip the cable end in silver solder flux then dip it in the 

molten solder for about 30 seconds.  Pull the cable out and tap the end on 

the solder pot to remove excess.  When the joint cools dip it in clear 

polyurethane to seal it from moisture.  Takes longer to describe the process 

than do the process.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum