Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Brass Toilet Seat Screws Requested

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
tonyrenshaw268(at)gmail.c
Guest





PostPosted: Tue Jul 27, 2010 12:19 am    Post subject: Brass Toilet Seat Screws Requested Reply with quote

Gidday,I'd like to make Bob Nuckolls External Power Receptacle and I need to get hold of the brass screws recommended. If one of you guys states-side, next time you go to Home Depot or Lowes happens to remember and would be happy to buy 2 sets, and put them in the post, I'd kindly appreciate the help, and beam over some money or get it to you one way or the other? Here is what Bob says to describe them.
Reg
Tony Renshaw
Sydney Aussie......home building.
P.S. Where I come from there is no such thing as a brass fitting, only plastic.


You'll need two sets of toilet-seat screws from a
hardware store or plumbing shop (be sure to get "aircraft
quality" toilet-seat screws - shouldn't cost more than $100
a set!!!). These will be about 3" long, made of brass and
come with nuts and washers. They'll be .312" coarse thread.
You need the ones with very low profile heads. You'll also
need two (.032 thick minimum) heavy brass washers [8]
with .312" holes in them and an o.d. of .500 to .625".

[quote][b]


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
craigb(at)onthenet.com.au
Guest





PostPosted: Tue Jul 27, 2010 1:52 am    Post subject: Brass Toilet Seat Screws Requested Reply with quote

tony go to bunnings, or a local bolt shop, you wont have any trouble
getting brass screws, most chandlery (boat parts) shops also have them
[quote] --


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group