 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
brubakermal(at)yahoo.com
Guest
|
 Posted: Thu Aug 05, 2010 8:21 pm Post subject: flaperon hardware mod 3 |
 |
|
I need some flaperon hardware for a mod 3for a frind .Can a person ship the alunimun for that cut to width and rooled up in a 24 in box?
Malcolm Brubaker
Michigan Sport
Pilot Repair
LSRM-A, PPC, WS
(989)513-3022
From: Jim_and_Lucy Chuk <thesupe(at)hotmail.com>
To: kitfox list <kitfox-list(at)matronics.com>
Sent: Thu, August 5, 2010 7:36:21 PM
Subject: RE: Re: ground loop damage assessment
Jerry, After I sent this message, I remembered about another set of Kitfox 1 wings I heard about out in Idaho. It will take me a bit of digging to get then number in Idaho, so let me kinow if things don't work out with Bret's wings and I will track down the Idaho #. Take care, Jim Chuk Avids, Kitfox 4 (building) Mn
From: thesupe(at)hotmail.com
To: kitfox-list(at)matronics.com
Subject: RE: Re: ground loop damage assessment
Date: Thu, 5 Aug 2010 19:25:49 +0000
.ExternalClass .ecxhmmessage P {padding:0px;} .ExternalClass body.ecxhmmessage {font-size:10pt;font-family:Tahoma;} Jerry, get ahold of Bret Mckinney at Avid/Airdale in Rhinelander, Wi. I traded him a set of Kitfox 1 wings a while back, he may still have them. His # is 1-715-369-1343 and email is sales(at)airdale.com (sales(at)airdale.com) take care, Jim Chuk Avids, Kitfox 4 (building) Mn
| Quote: | Subject: Re: ground loop damage assessment
From: nahsikhs(at)elltel.net
Date: Thu, 5 Aug 2010 12:05:57 -0700
To: kitfox-list(at)matronics.com
--> Kitfox-List message posted by: "Tom Jones" <nahsikhs(at)elltel.net>
jlno7(at)aim.com wrote:
> I have a Kitfox 1 and recently ground looped into a tree. The right
> wing was badly damaged and will need replacing along with the flaperone
> hinges and propeller damaged. the fusalage and left wing are good. I
> want to know if anyone would have a ballpark guess of how much this
> would cost to repair providing I do the wing fabric myself and purchase
> the wing and have someone tare the engine apart. If this is too
> costly, How much could I get if I sold it as is? (ballpark)
>
> Jerry Novak
> Pulaski WI
Jerry, that would be a big ball park. If you have to buy all new parts to build a new wing I would make an educated guess of $3500. if you can find a used wing and/or salvage parts from your damaged wing it could be considerably less.
Having the engine torn down and inspected would't be too much if their is no damage. I guess about $300.
--------
Tom Jones
Classic IV
503 Rotax, 72 inch Two blade Warp
Ellensburg, WA
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=307675#307675
|
| Quote: |
target=_blank>http://www.matronics.com/Navigator?Kitfox-List
ttp://forums.matronics.com
=_blank>http://www.matronics.com/contribution
|
[/b][quote]http://www.mat=========
[b]
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
 |
lcfitt(at)sbcglobal.net
Guest
|
| Posted: Fri Aug 06, 2010 3:31 am Post subject: flaperon hardware mod 3 |
|
|
Malcolm,
Is it the flaperon skin ou are asking about. If so, yes it can be rolled. I bought the leading edge aluminum for my project in a roll. It was from Aircraft Spruce. I don't recall the thickness as I am out of town as I write this, but it should be in their online catalogue.
Lowell
[quote] ---
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
