 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Kelly McMullen
Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ
|
 Posted: Mon Aug 09, 2010 8:11 am Post subject: Side Vents |
 |
|
I must be missing something, but I sure can't find where in the plans
these get installed. I've seen folks installing somewhere between sec.
41 and sec 45, but they clearly come in the finish kit, but aren't
mentioned in sec 45-50 that I can find. I note it is called SV-10 on
the finish kit parts listing but SV-1 or SV-combo in the on line
catalog. Looks like I only need a couple SV-1 for install in the rear
for overhead console.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD |
|
| Back to top |
|
 |
philperry9(at)gmail.com
Guest
|
| Posted: Mon Aug 09, 2010 8:24 am Post subject: Side Vents |
|
|
Kelly,
Check 35-10.
On Mon, Aug 9, 2010 at 11:10 AM, Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)> wrote:
[quote] --> RV10-List message posted by: Kelly McMullen <apilot2(at)gmail.com (apilot2(at)gmail.com)>
I must be missing something, but I sure can't find where in the plans
these get installed. I've seen folks installing somewhere between sec.
41 and sec 45, but they clearly come in the finish kit, but aren't
mentioned in sec 45-50 that I can find. I note it is called SV-10 on
the finish kit parts listing but SV-1 or SV-combo in the on line
catalog. Looks like I only need a couple SV-1 for install in the rear
for overhead console.
===========
arget="_blank">http://www.matronics.com/Navigator?RV10-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Kelly McMullen
Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ
|
| Posted: Mon Aug 09, 2010 8:38 am Post subject: Side Vents |
|
|
Thanks. Not there on my rev. 1 set of plans. Now that I look back at
rev. 0 plans it is there. Strange indeed. Wonder where they insert it
in the finish kit plans, since I only have rev 0 of those.
On Mon, Aug 9, 2010 at 9:20 AM, Phillip Perry <philperry9(at)gmail.com> wrote:
| Quote: | Kelly,
Check 35-10.
On Mon, Aug 9, 2010 at 11:10 AM, Kelly McMullen <apilot2(at)gmail.com> wrote:
>
>
>
> I must be missing something, but I sure can't find where in the plans
> these get installed. I've seen folks installing somewhere between sec.
> 41 and sec 45, but they clearly come in the finish kit, but aren't
> mentioned in sec 45-50 that I can find. I note it is called SV-10 on
> the finish kit parts listing but SV-1 or SV-combo in the on line
> catalog. Looks like I only need a couple SV-1 for install in the rear
> for overhead console.
>
> ===========
> arget="_blank">http://www.matronics.com/Navigator?RV10-List
> ===========
> http://forums.matronics.com
> ===========
> le, List Admin.
> ="_blank">http://www.matronics.com/contribution
> ===========
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD |
|
| Back to top |
|
|
AirMike
Joined: 27 Feb 2007
Posts: 514
Location: Nevada
|
| Posted: Mon Aug 09, 2010 10:19 pm Post subject: Vents |
|
|
I do not think that there is any mention of installation in the plans. I just put the two vents in with proseal and a dimpled pop rivet. I put the expensive Van's eyeball on and they work fine. The proseal holds them in place tenaciously and it is easy to align. Sand them lightly inside before you install so that they take the finish paint. Remove the eyeball vents and cover the inside with masking tape for the finish coat.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
See you OSH '18
Q/B - sold. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
