Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rotax/Dynon RPM

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

Fergus Kyle

Joined: 03 Jun 2007
Posts: 291
Location: Burlington ON Canada

Posted: Mon Sep 06, 2010 9:22 am Post subject: Rotax/Dynon RPM

Having spent a futile 42 minutes attempting to find a UserName which would equip me to explore the insides of Dynon lists, I am begging info on the combination subject above. I found nothing to indicate compatability in the Europa 914 kit manual, nothing in the Rotax manual (perhaps I’m amiss there) and can’t seem to address their technical staff directly – how wise they are .  

        But someone out there must have attempted to marry the two successfully and I’d like to lope along in copying the task. Does any on list know the secret of the 914 “rev counter” output, and is it compatable with the Dynon RPM acceptance standards?  

[i.e: Can I just hook ‘em up and get a Dynon reading?  

        I apologise if this means I’ve ignored previous discussion.  

Cheers Ferg     [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Ivor Phillips

Joined: 16 Jan 2006
Posts: 253
Location: London UK

Posted: Mon Sep 06, 2010 11:44 am Post subject: Rotax/Dynon RPM

Yes it isnt a problem Ferg

 http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl

 Is the Dynon link with links to the current manuals, Should give you every thing you need,

 If not email me direct and i will sort out the correct connections and setup with the dynon and 914

 regards

 Ivor

 On 6 September 2010 18:19, Fergus Kyle <VE3LVO(at)rac.ca (VE3LVO(at)rac.ca)> wrote:

 [quote]  

        Having spent a futile 42 minutes attempting to find a UserName which would equip me to explore the insides of Dynon lists, I am begging info on the combination subject above. I found nothing to indicate compatability in the Europa 914 kit manual, nothing in the Rotax manual (perhaps I’m amiss there) and can’t seem to address their technical staff directly – how wise they are .  

        But someone out there must have attempted to marry the two successfully and I’d like to lope along in copying the task. Does any on list know the secret of the 914 “rev counter” output, and is it compatable with the Dynon RPM acceptance standards?  

[i.e: Can I just hook ‘em up and get a Dynon reading?  

        I apologise if this means I’ve ignored previous discussion.  

Cheers Ferg 	  Quote: 	
		  



arget="_blank">http://www.matronics.com/Navigator?Europa-List

ttp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	


[b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum