Matronics Email Lists :: View topic - Flap not bottoming out against rear spar doubler

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Flap not bottoming out against rear spar doubler

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

rv10flyer

Joined: 25 Aug 2009
Posts: 364

Posted: Sun Sep 05, 2010 3:17 pm Post subject: Flap not bottoming out against rear spar doubler

Ref Pg 23-9, Step 4. 



I have about 1/16" clearance between rear spar doubler and flap leading edge(reflex position). The flap leading edge is bottoming out against the bottom wing skin before reaching the doubler. I don't want to finish the aileron rigging or move on to the tips until this is resolved.



I did check angle between aft top wing skin and flap...it does equal approx 3 degrees.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Wayne G.

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum