cleone24(at)mchsi.com Guest
|
Posted: Tue Sep 21, 2010 12:06 pm Post subject: No Title |
|
|
Bob,
Hope you can work things worked out there and
so I will go ahead with my concerns abt the
AEC9024-30.
It will soon be getting cooler and I hope to fly
my Zenith Zodiac with the Wm. Wynne Corvair
engine before it gets cold.
Looking at Fig Z-9, I propose using this circuit but
the 9024 module isn't available. Looking at the
diagram I see that the diode across the contactor
coil is missing and I would assume that is in the
module. I can do that. Then I'm not sure what else
I need to do. I have tried some things on paper
but each time I find something that isn't working.
If you could suggest something for the missing
parts of the circuit I could proceed. I'm an old
Ham but not a design engineer.
Cleone24(at)mchsi.com
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|