Matronics Email Lists :: View topic - Fwd: iPad Mount update

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fwd: iPad Mount update

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

flysrv10(at)gmail.com
Guest

Posted: Thu Sep 23, 2010 4:00 pm Post subject: Fwd: iPad Mount update

I decided to relocate my iPad after my a flight test last weekend.  I found the previous location a little too distant for my taste.  I think the most ideal position is at eye level where John Miller has installed his.  Hopefully the Gizmo guys will come up with a panel mount and give those in process of planning their panel another option.

I swapped the 2" standard clamp leg with a 6" long leg from Ram Mount (they are great people to deal with) and I think that I like this arrangement much better.  The second picture shows the iPad in it's pilot-exit configuration.  Will post a flight test report this weekend.

[img]cid:B7B47C67-B360-4723-B023-71E6C38EFB62[/img]



[img]cid:C9EC74F5-9A39-4EB1-87C2-ABEA01D766A0[/img]

[img]cid:04D2ED35-275D-4726-9FBA-52B83B13F452[/img]



Begin forwarded message:

 	  Quote: 	
		  From: Rob Kermanj <flysrv10(at)gmail.com (flysrv10(at)gmail.com)>



Date: September 13, 2010 6:17:08 PM EDT



To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)



Subject: iPad Mount



Reply-To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

I finally received my iPad mount from Ram Mounts.  It is a good quality and strong mount.

I used a sheet of aluminum and formed it around the tunnel to use as a temporary bracket and to mount the iPad.  Once flight testing t is complete, I will most likely remove the extra aluminum bracket and attach the mount with thru bolts to the tunnel cover.

I have pointed the iPad's charging port up under the panel; so that I can get a 12V charger and connect it behind the panel to charge continuously during flights.

Flight test, this weekend.

[img]cid:D1EFDAA2-7C60-45D8-BB73-35FD84B6F65C[/img]



IMG_0046.JPG

 



[img]cid:7CEAB0A6-A98C-4B75-B4D3-A8FF2FDFA112[/img]



IMG_0047.JPG

IMG_0048.jpg

Description:

Filesize:

48.72 KB

Viewed:

4531 Time(s)

IMG_0046.jpg

Description:

Filesize:

42.59 KB

Viewed:

4531 Time(s)

IMG_0047.jpg

Description:

Filesize:

54.17 KB

Viewed:

4531 Time(s)

IMG_0046.jpg

Description:

Filesize:

57.87 KB

Viewed:

4531 Time(s)

IMG_0047.jpg

Description:

Filesize:

32.25 KB

Viewed:

4531 Time(s)

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Thu Sep 23, 2010 6:49 pm Post subject: Fwd: iPad Mount update

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Fri Sep 24, 2010 6:35 am Post subject: Fwd: iPad Mount update

Kelly McMullen

Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

Posted: Fri Sep 24, 2010 7:06 am Post subject: Fwd: iPad Mount update

Hey good buddy, got yor ears on? You is shootin' blanks.



On Fri, Sep 24, 2010 at 7:28 AM, Deems Davis <deemsdavis(at)cox.net (deemsdavis(at)cox.net)> wrote:

 [quote]

 

 [b]

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD

Tim Olson

Joined: 25 Jan 2007
Posts: 2872

Posted: Fri Sep 24, 2010 7:28 am Post subject: Fwd: iPad Mount update

He's got something funky with his email program.  I am

trying to pull it apart now and see if there is an attachment

to view.  But here is the text I extracted.  I noticed the message

had size, but just wasn't displaying....

Tim



<From Deems>



   Rob, Thanks for the update, I've been following a thread on VAF that

is similar. I've flown about 40 hours with my Ipad, and have a pretty

good feel for how I use it (VFR). Today, I spent 30 + minutes in the

cockpit trying to identify the 'optimum' mounting location. The

Ram-Mount hardware is VERY impressive.



It was hard to find a location that both provides excellent access, AND

didn't interfere with another cockpit function. (I really like the way

my panel is laid out and don't want to compromise it) I came to the

conclusion that for me, a hard mount isn't the best bet. I've got moving

map gps/efis on the panel with approaches, etc. I'm only flying the

plane VFR now, so the main use for me is:



Pre-flight planning (means that it's got to be easily removable). I'm

not keen about having the 'empty mounting gear

Electronic POH _ I've got options on Primary and backup EFIS for

checklists, but I've converting my POH to a pdf, that I have on the IPAD

Sectional scanning - My EFIS only zooms out to 200 miles, and it doesn't

provide the ability to 'scroll' around and see what the surrounding

landscape holds

Flight Guide Replacement Airport info -  With the changes to pricing for

the hard copy, it's really convenient to have it all in the IPAD.



So most of my usage is intermittent while in flight. I like being able

to grab the IPAD and do whatever I need to do, and then put it out ot

the way. When I need it it's really convenient to have visible with a

hands free view.  (my wife is getting tired of 'here, hold this').  I

have a center console, that is now pretty empty , with all of the

charts, POH,  and Flight Guide removed. So I think the solution for me,

is to fabricate a kneeboard-holder, that serves as a "platform" where I

can set/rest the Ipad when I need the information/function handy, (e.g.

airport/rwy data landing & TO) and my hands free. I'll make it with an

angle that allows for best viewing /access, but I'll probably put some

'non-skid' material on the back of it, and the knee-pad so that it can

be easily rotated and stored in the center console when its just in the way.



Deems



On 9/24/2010 10:03 AM, Kelly McMullen wrote:

 	  Quote: 	
		   Hey good buddy, got yor ears on? You is shootin' blanks.



 On Fri, Sep 24, 2010 at 7:28 AM, Deems Davis <deemsdavis(at)cox.net

 <mailto:deemsdavis(at)cox.net>> wrote:





 *

 *

Tim Olson

Joined: 25 Jan 2007
Posts: 2872

Posted: Fri Sep 24, 2010 7:42 am Post subject: Fwd: iPad Mount update

After reading Deems's email I have to say that I didn't

want to even reply before, because I don't want to knock

anyones install, but I personally feel that I love

my panel layout. I wouldn't WANT an ipad on the panel.

I think it would be a pain in the butt to use in flight

on the panel and I think even hard mounted it would be

a pain in the butt in turbulence when you need it.

I think a mount might be nice as a holder, but for in

flight USE I think just hand-holding is great.  It's

just a reference device....the panel holds all the real

navigation gear.



I do like holding it, and like being able to hand it

to the wife or kids, and if I were going to mount it

anywhere, it would be as a kneeboard.  Although as

a kneeboard it's a little large.  But, personally I

feel it's far more important to have a good place to

handily STOW it than it would be to mount it.

Other than that, it's the ideal cockpit sized device.

On the panel though I think it would really suck

in bumps.....there are days I can't even push the

buttons on my radios or turn a knob without

my hand bouncing around hitting the wrong thing....a

touchscreen would be miserable.

Tim Olson - RV-10 N104CD

do not archive

On 9/24/2010 10:03 AM, Kelly McMullen wrote:

 	  Quote: 	
		   Hey good buddy, got yor ears on? You is shootin' blanks.



 On Fri, Sep 24, 2010 at 7:28 AM, Deems Davis <deemsdavis(at)cox.net

 <mailto:deemsdavis(at)cox.net>> wrote:

sean(at)stephensville.com
Guest

Posted: Fri Sep 24, 2010 7:59 am Post subject: Fwd: iPad Mount update

I think this has already been linked before.  It seems a bit pricey, 

but it *is* an "aviation" product. 

http://www.forpilotsonly.com/ipad.htm

-Sean

On 9/24/10 10:26 AM, Tim Olson wrote:

 	  Quote: 	

 After reading Deems's email I have to say that I didn't

 want to even reply before, because I don't want to knock

 anyones install, but I personally feel that I love

 my panel layout. I wouldn't WANT an ipad on the panel.

 I think it would be a pain in the butt to use in flight

 on the panel and I think even hard mounted it would be

 a pain in the butt in turbulence when you need it.

 I think a mount might be nice as a holder, but for in

 flight USE I think just hand-holding is great.  It's

 just a reference device....the panel holds all the real

 navigation gear.

 I do like holding it, and like being able to hand it

 to the wife or kids, and if I were going to mount it

 anywhere, it would be as a kneeboard.  Although as

 a kneeboard it's a little large.  But, personally I

 feel it's far more important to have a good place to

 handily STOW it than it would be to mount it.

 Other than that, it's the ideal cockpit sized device.

 On the panel though I think it would really suck

 in bumps.....there are days I can't even push the

 buttons on my radios or turn a knob without

 my hand bouncing around hitting the wrong thing....a

 touchscreen would be miserable.

 Tim Olson - RV-10 N104CD

 do not archive

 On 9/24/2010 10:03 AM, Kelly McMullen wrote:

> Hey good buddy, got yor ears on? You is shootin' blanks.

>

> On Fri, Sep 24, 2010 at 7:28 AM, Deems Davis <deemsdavis(at)cox.net

> <mailto:deemsdavis(at)cox.net>> wrote:

>

Robin(at)PaintTheWeb.com
Guest

Posted: Fri Sep 24, 2010 8:32 am Post subject: Fwd: iPad Mount update

I was at the Apple store yesterday and saw a cool iPad accessory that

converts the iPad to a back of the head rest mounted display (straps

around the headrest). An obvious choice for car rides or rear pax video

entertainment in a -10. Plus a good place to store it. Out of the way but

handy.



Robin



--

Tim Olson

Joined: 25 Jan 2007
Posts: 2872

Posted: Fri Sep 24, 2010 9:45 am Post subject: Fwd: iPad Mount update

Now that is a NEED for me!  I'll have to quick find out

about that and order one up for this trip!



Tim Olson - RV-10 N104CD

do not archive

On 9/24/2010 11:25 AM, Robin Marks wrote:

[quote] 



 I was at the Apple store yesterday and saw a cool iPad accessory that

 converts the iPad to a back of the head rest mounted display (straps

 around the headrest). An obvious choice for car rides or rear pax video

 entertainment in a -10. Plus a good place to store it. Out of the way but

 handy.



 Robin



 --

Tim Olson

Joined: 25 Jan 2007
Posts: 2872

Posted: Fri Sep 24, 2010 10:09 am Post subject: Fwd: iPad Mount update

Was it this one by chance?

http://www.zoogue.com/



Looks like they're sold out right now, but after Oct 14th

they are going to have more.



Some insane turkey on eBay marked them up 4X, too....nice...

http://cgi.ebay.com/IPAD-CASE-CAR-Headrest-mount-ZooGue-Smart-Case-seat-/110563554818?pt=LH_DefaultDomain_0&hash=item19be19f602



How do people think they'll fool someone that way?

Tim Olson - RV-10 N104CD

do not archive

On 9/24/2010 11:25 AM, Robin Marks wrote:

[quote] 



 I was at the Apple store yesterday and saw a cool iPad accessory that

 converts the iPad to a back of the head rest mounted display (straps

 around the headrest). An obvious choice for car rides or rear pax video

 entertainment in a -10. Plus a good place to store it. Out of the way but

 handy.



 Robin



 --

Robin(at)PaintTheWeb.com
Guest

Posted: Fri Sep 24, 2010 11:05 am Post subject: Fwd: iPad Mount update

I have seen the Zoogue. It is a bit bulkier than I like but it does much more than the one I saw because it's a "convertible" much like the official apple case but I was not a fan of the Velcro portion

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum