Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

S7 engine mount

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

Rich L

Joined: 23 Feb 2008
Posts: 63
Location: North Idaho

Posted: Sat Oct 02, 2010 6:34 am Post subject: S7 engine mount

I have a Kitfox S-7 from Skystar with a 912uls and 650 hours on it.



I bought two engine mounts P/N 90048.000,  last spring and used them to replace the two lower mounts.  I thought they were drooping too much. 



The s7 I have was built from the skystar manual and I used it to replace the mounts.



It calls for  a 1 7/16" rubber bushing P/N 01146.000, which was missing before I replaced the mounts. (My building partner did it).



I installed the bushing and new mounts and noticed a small buzzing vibration after that.



I have since rebuilt the carbs, and the gearbox and have gone full circle with the vibration. Yes I Balanced



Is there a new mount or method in the newer S7's?

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Rich Little
N812RL S-7 912ULS
North Idaho
Kiev Prop

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum