themckenneys(at)hotmail.c
Guest
|
 Posted: Mon May 09, 2011 4:06 am Post subject: Kitfox-List Digest: 3 Msgs - 05/08/11 |
 |
|
I can not remember where I found these,but check out these tires for a 6 inch rim http://www.desser.com/store/products/21%7B47%7D800%252d6-4-PLY-TUBELESS-LIGHT-SPORT-TUNDRA-AIRCRAFT-TIRE.html and check out Matcomfg for a new 10 inch rim with external break, gives you alot of choices for ATV sand tires
> Date: Mon, 9 May 2011 00:01:52 -0700
[quote] From: kitfox-list(at)matronics.com
To: kitfox-list-digest(at)matronics.com
Subject: Kitfox-List Digest: 3 Msgs - 05/08/11
*
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Kitfox-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Kitfox-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2011-05-08&Archive=Kitfox
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2011-05-08&Archive=Kitfox
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Kitfox-List Digest Archive
---
Total Messages Posted Sun 05/08/11: 3
----------------------------------------------------------
Today's Message Index:
----------------------
1. 10:03 AM - Re: Re: Firewall materiel? (Lowell Fitt)
2. 10:10 AM - rubber bumper on tube gear (Dave G)
3. 07:09 PM - Re: Tundra Tires (hearndt)
________________________________ Message 1 _____________________________________
Time: 10:03:22 AM PST US
From: "Lowell Fitt" <lcfitt(at)sbcglobal.net>
Subject: Re: Re: Firewall materiel?
Roger,
A little confused here. Are you suggesting that because Flight Designs
requires the blanket be replaced that I do the same to my Kitfox? just
wondering.
Lowell
--------------------------------------------------
From: "Roger Lee" <ssadiver1(at)yahoo.com>
Sent: Friday, May 06, 2011 9:30 PM
Subject: Kitfox-List: Re: Firewall materiel?
>
> I agree it was just my poor terminology. Never the less FD had to do 110
> planes to meet the ASTM standard. Out of 110 planes there are only a few
> die hards left. I have two to do this month with the Rotax 5 year rubber
> replacement. They are easy to install, but everything on the firewall
> needs to come off with a couple of exceptions. The engine mount and all
> the other accessories mounted to the firewall holds it in place. Then you
> can use aluminum tape to make the edges nice and neat. The FD firewall
> blanket is a stainless steel thick foil with a batting on the back. You do
> need to be careful around the edges because it is like a very sharp knife.
> You also need to make sure all your oil and fuel lines are encased in
> firesleeve. The #10 fits the fuel lines and the #14 the oil lines.
>
> --------
> Roger Lee
> Tucson, Az.
> Light Sport Repairman - Maintenance Rated
> Rotax Repair Center
> Home 520-574-1080 TRY HOME FIRST
> Cell 520-349-7056
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=339178#339178
>
>
>
________________________________ Message 2 _____________________________________
Time: 10:10:20 AM PST US
From: "Dave G" <d.goddard(at)ns.sympatico.ca>
Subject: rubber bumper on tube gear
Hello all, I have lost one of the rubber donut type bumpers from my Model
IV. If anyone has one or some I would like to buy them. I also need bungees
in order to replace my old ones.
Please reply by email off list if possible. If nobody has any I will check
with Kitfox. Thanks.
________________________________ Message 3 _____________________________________
Time: 07:09:24 PM PST US
Subject: Kitfox-List: Re: Tundra Tires
From: "hearndt" <hearndt(at)gmail.com>
Hi Joe,I have a firestar 2 and are very interested in the tire on your plane.
Could you please let me know what it would it cost me to change?
Helmut Arndt
hearndt(at)gmail.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=339276#339276
<==========
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
