Matronics Email Lists :: View topic - engine mount plans rotax ring type

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

engine mount plans rotax ring type

Matronics Email Lists Forum Index -> Zenith701801-List

View previous topic :: View next topic

Author Message

graeme(at)coletoolcentre.
Guest

Posted: Wed Oct 20, 2010 8:19 pm Post subject: engine mount plans rotax ring type

does any one have a drawing for a rotax ring mount to fire wall with tube 

diameter and thickness.

  and the isolastic mount used.

  I am going to fabricate one for my CH701



  graemecns

ricklach

Joined: 20 Jun 2006
Posts: 127
Location: Kernville, Calif.

Posted: Thu Oct 21, 2010 6:37 am Post subject: Re: engine mount plans rotax ring type

That is a very hard mount to make if your thinking of duplicating the factory mount. The clearances are very tight and the bending process is painful. I manufacture an exact copy of the Rotax mount at a much better price if you decide to buy rather than build.



Rick

rick(at)ravenaviation.us

_________________
701Driver
N35 26.700, W118 16.743

graeme(at)coletoolcentre.
Guest

Posted: Thu Oct 21, 2010 2:07 pm Post subject: engine mount plans rotax ring type

Hi Rick



I do have the rotax ring mount.

I am going to build the rotax ring to the firewall mount?



Thanks Graemecns



---

ricklach

Joined: 20 Jun 2006
Posts: 127
Location: Kernville, Calif.

Posted: Fri Oct 22, 2010 7:14 am Post subject: Re: engine mount plans rotax ring type

Hi Graemecs,



I never got a drawing with my 701 plans for the ring mount to firewall mount. I haven't asked Zenith about it either, guess I should. But if you find out anything or track down a drawing please let me know as I need to build one too.



Rick

_________________
701Driver
N35 26.700, W118 16.743

graeme(at)coletoolcentre.
Guest

Posted: Sat Oct 23, 2010 2:03 am Post subject: engine mount plans rotax ring type

I haven't asked zenair recently but a year ago they didn't have one.

I will try them again.and post here if I get one.

Other wise I may have to become a pioneer and design and build my own not 

the ideal solution



Graemecns



---

ricklach

Joined: 20 Jun 2006
Posts: 127
Location: Kernville, Calif.

Posted: Sat Oct 23, 2010 7:19 am Post subject: Re: engine mount plans rotax ring type

The last time I spoke with Zenith there logic was that the Ring mount was a Rotax Item and the mount from the firewall to the ring mount was part of their firewall forward package. I would think it should be part of the drawing package for scratch builders. I wasn't ready for it so I never pushed the point. 



Good Luck.

_________________
701Driver
N35 26.700, W118 16.743

craig(at)craigandjean.com
Guest

Posted: Sat Oct 23, 2010 8:25 am Post subject: engine mount plans rotax ring type

FWIW the 601XL main plans include 4 different mounts: Jabiru 3300,

Continental O-200, Lycoming O-235 conical and dynafocal.



-- Craig



--

dougsnash

Joined: 14 Apr 2008
Posts: 281

Posted: Sat Oct 23, 2010 6:39 pm Post subject: engine mount plans rotax ring type

This might not be that answer anybody is looking for but...



Has anyone gotten a price from Zenith for their portion of the mount?  I know that the Rotax portion is outrageous but it has been my experience that Zenith's prices for the parts they build are usually pretty reasonable.



Doug MacDonald

CH-701 C-GBQX

NW Ontario, Canada



Do Not Archive



 	  Quote: 	
		   

 <rick(at)ravenaviation.us>

 

 The last time I spoke with Zenith there logic was that the

 Ring mount was a

 Rotax Item and the mount from the firewall to the ring

 mount was part of

 their firewall forward package. I would think it should be

 part of the

 drawing package for scratch builders. I wasn't ready for it

 so I never

 pushed the point. 

 

 Good Luck.

 

 --------

 701Driver

 N35 26.700,  W118 16.743

graeme(at)coletoolcentre.
Guest

Posted: Sun Oct 24, 2010 12:49 am Post subject: engine mount plans rotax ring type

Hi I have sent the question to zenair again so will see there latest 

response.



Graemecns



---

ricklach

Joined: 20 Jun 2006
Posts: 127
Location: Kernville, Calif.

Posted: Sun Oct 24, 2010 7:16 am Post subject: Re: engine mount plans rotax ring type

Your right Doug, the price for the Rotax portion is outrages at more than $1100. That is why I started making them for other guys and I only charge $500 for my mount. I just never got around to making the mount between the firewall and the engine. I'm now getting to that point so I need a drawing or something to make that mount. 



Here is a picture of my Ring Mount.



Rick

IMG_2293.jpg

Description:

Filesize:

23.24 KB

Viewed:

9103 Time(s)

_________________
701Driver
N35 26.700, W118 16.743

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith701801-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum