Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Successful Windscreen installation with Weld-On 10

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Mike Whisky



Joined: 05 Jun 2006
Posts: 336
Location: Switzerland

PostPosted: Tue Oct 19, 2010 2:29 am    Post subject: Successful Windscreen installation with Weld-On 10 Reply with quote

Hello,

after having read so much about the Weld-On 10 stories and the crazing etc I took the step last weekend and installed the windshield with the help of two friends. I guess the result is very satisfying no crazing.
I put a write up and photos on my website which describes what I did.

I just wanted to share my experience.

It was quite easy to do. And I hope that crazing will now develop in the future.

Write up:
http://www.wellenzohn.net/HB-YNN/Construction_Blog/Eintrage/2010/10/19_Glueing_the_windshield.html

Cheers
Michael


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List



IMG_1036.jpg
 Description:
 Filesize:  102.44 KB
 Viewed:  3393 Time(s)

IMG_1036.jpg



_________________
RV-10 builder (flying)
#511
Back to top
View user's profile Send private message Visit poster's website  
AirMike



Joined: 27 Feb 2007
Posts: 514
Location: Nevada

PostPosted: Tue Oct 19, 2010 7:42 am    Post subject: Successful Windscreen installation with Weld-On 10 Reply with quote

Congratulations on the good installation and the fine "write-up". I think that you have established the protocol for window installation. If others can replicate your success it would be awesome. I had crazing at two locations with the suggested Vans technique. Fortunately they have not "run" in the one year that the plane has been flying. Thanks for sharing your experience in the finest Matronics tradition.

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
See you OSH '18
Q/B - sold.
Back to top
View user's profile Send private message  
kdbelue(at)charter.net
Guest





PostPosted: Tue Oct 19, 2010 10:59 am    Post subject: Successful Windscreen installation with Weld-On 10 Reply with quote

I think that window installation with Weldon without crazing is the norm and has been done for several years. Good write up.

Sent from my iPhone

On Oct 19, 2010, at 10:42 AM, "AirMike" <Mikeabel(at)Pacbell.net> wrote:

Quote:


Congratulations on the good installation and the fine "write-up". I think that you have established the protocol for window installation. If others can replicate your success it would be awesome. I had crazing at two locations with the suggested Vans technique. Fortunately they have not "run" in the one year that the plane has been flying. Thanks for sharing your experience in the finest Matronics tradition.

--------
OSH '10 or Bust
Q/B - finally done




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=316330#316330












- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
 
jcumins(at)jcis.net
Guest





PostPosted: Tue Oct 19, 2010 11:16 am    Post subject: Successful Windscreen installation with Weld-On 10 Reply with quote

Whats the link to the write up.

John G. Cumins
40864 Wings

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
 
kdbelue(at)charter.net
Guest





PostPosted: Tue Oct 19, 2010 11:58 am    Post subject: Successful Windscreen installation with Weld-On 10 Reply with quote

Here:
http://www.wellenzohn.net/HB-YNN/Construction_Blog/Eintrage/2010/10/19_Glueing_the_windshield.html

Sent from my iPhone

On Oct 19, 2010, at 2:08 PM, "John Cumins" <jcumins(at)jcis.net (jcumins(at)jcis.net)> wrote:

[quote]--> RV10-List message posted by: "John Cumins" <jcumins(at)jcis.net (jcumins(at)jcis.net)>

Whats the link to the write up.

John G. Cumins
40864 Wings

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
 
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group