 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Tim Olson
Joined: 25 Jan 2007
Posts: 2879
|
 Posted: Thu Nov 11, 2010 8:49 am Post subject: Need a measurement from a non-flying builder |
 |
|
Anyone have their landing gear wheel fairing parts,
that U-1010-L that we talked about, and not have
them mounted yet? I'm hoping to get the hole
to hole spacing measurement for the 3 bolt holes,
and maybe a tracing of the circular cutout and the
surrounding area. There's a vendor that would
like to get dimensions for a part to make it
more bullet proof, but he'd need to know the
shape, and hole spacing, so he can make a couple
of trial runs at it.
Mine are all together and really tough to get at, or
I'd do it. But if you haven't mounted them yet,
it would be awesome to get a tracing of it.
--
Tim Olson - RV-10 N104CD
do not archive
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
n223rv(at)wolflakeairport
Guest
|
| Posted: Thu Nov 11, 2010 9:16 am Post subject: Need a measurement from a non-flying builder |
|
|
$17 from Vans, and it would be exact.... Just a thought....
Sent from my iPhone
On Nov 11, 2010, at 11:46 AM, Tim Olson <Tim(at)myrv10.com> wrote:
| Quote: |
Anyone have their landing gear wheel fairing parts,
that U-1010-L that we talked about, and not have
them mounted yet? I'm hoping to get the hole
to hole spacing measurement for the 3 bolt holes,
and maybe a tracing of the circular cutout and the
surrounding area. There's a vendor that would
like to get dimensions for a part to make it
more bullet proof, but he'd need to know the
shape, and hole spacing, so he can make a couple
of trial runs at it.
Mine are all together and really tough to get at, or
I'd do it. But if you haven't mounted them yet,
it would be awesome to get a tracing of it.
--
Tim Olson - RV-10 N104CD
do not archive
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Albert Gardner
Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ
|
| Posted: Thu Nov 11, 2010 9:27 am Post subject: Need a measurement from a non-flying builder |
|
|
They are available from Vans at $17 each. That might be more accurate for a
prospective vendor than a tracing.
It sounds like this is a part I would like to have somebody manufacture
also.
Albert Gardner
N991RV
Yuma, AZ
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-9A N872RV
RV-10 N991RV |
|
| Back to top |
|
|
Tim Olson
Joined: 25 Jan 2007
Posts: 2879
|
| Posted: Thu Nov 11, 2010 9:37 am Post subject: Need a measurement from a non-flying builder |
|
|
That's cheaper than I would have guessed!
I did find a builder who offered to work with them
on getting the parts and checking it out, so I
think we should be set now. Cancel my request
for measurements. There's always someone who'll
step up and help!
Tim
On 11/11/2010 11:12 AM, Michael Kraus wrote:
| Quote: |
$17 from Vans, and it would be exact.... Just a thought....
Sent from my iPhone
On Nov 11, 2010, at 11:46 AM, Tim Olson<Tim(at)myrv10.com> wrote:
>
>
> Anyone have their landing gear wheel fairing parts,
> that U-1010-L that we talked about, and not have
> them mounted yet? I'm hoping to get the hole
> to hole spacing measurement for the 3 bolt holes,
> and maybe a tracing of the circular cutout and the
> surrounding area. There's a vendor that would
> like to get dimensions for a part to make it
> more bullet proof, but he'd need to know the
> shape, and hole spacing, so he can make a couple
> of trial runs at it.
>
> Mine are all together and really tough to get at, or
> I'd do it. But if you haven't mounted them yet,
> it would be awesome to get a tracing of it.
>
> --
> Tim Olson - RV-10 N104CD
> do not archive
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rene(at)felker.com
Guest
|
| Posted: Thu Nov 11, 2010 9:40 am Post subject: Need a measurement from a non-flying builder |
|
|
Or, beg Vans for a dimensioned drawing of that part......you never know,
they may give it to you.
Rene' Felker
N423CF
801-721-6080
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
partner14
Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas
|
| Posted: Thu Nov 11, 2010 2:53 pm Post subject: Need a measurement from a non-flying builder |
|
|
Tim, so does that mean someone is going to fab them and then make them availabel to all of us at a reasonable price??? Otherwise, I can make them, and make them available for around $20. Was already heading down that path with Pascal.... but if someone else is going to produce them, great.
Don McDonald
--- On Thu, 11/11/10, Tim Olson <Tim(at)myrv10.com> wrote:
| Quote: |
From: Tim Olson <Tim(at)myrv10.com>
Subject: Re: Need a measurement from a non-flying builder
To: rv10-list(at)matronics.com
Date: Thursday, November 11, 2010, 9:33 AM
--> RV10-List message posted by: Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)>
That's cheaper than I would have guessed!
I did find a builder who offered to work with them
on getting the parts and checking it out, so I
think we should be set now. Cancel my request
for measurements. There's always someone who'll
step up and help!
Tim
On 11/11/2010 11:12 AM, Michael Kraus wrote:
| Quote: | --> RV10-List message posted by: Michael Kraus<n223rv(at)wolflakeairport.net (n223rv(at)wolflakeairport.net)>
$17 from Vans, and it would be exact.... Just a thought....
Sent from my iPhone
On Nov 11, 2010, at 11:46 AM, Tim Olson<Tim(at)myrv10.com (Tim(at)myrv10.com)> wrote:
> --> RV10-List message posted by: Tim Olson<Tim(at)myrv10.com (Tim(at)myrv10.com)>
>
> Anyone have their landing gear wheel fairing parts,
> that U-1010-L that we talked about, and not have
> them mounted yet? I'm hoping to get the hole
> to hole spacing measurement for the 3 bolt holes,
> and maybe a tracing of the circular cutout and the
> surrounding area. There's a vendor that would
> like to get dimensions for a part to make it
> more bullet proof, but he'd need to know the
> shape, and hole spacing, so he can make a couple
> of trial runs at it.
>
> Mine are all together and really tough to get at, or
> I'd do it. But if you haven't mounted them yet,
> it would be awesome to get a tracing of it.
>
> --
> Tim Olson - RV-10 N104CD
> do not archive
>
>f="http://www.matronics.com/contribution" target=_blank>http://www.matr -Mat href="http://www.matronics.com/Navigator?RV10-List" target=_blank>httphttp://forums.matronics.com/" target=_blank>http://forums.matronics.com</================
|
|
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Don A. McDonald
40636 |
|
| Back to top |
|
|
Tim Olson
Joined: 25 Jan 2007
Posts: 2879
|
| Posted: Thu Nov 11, 2010 4:13 pm Post subject: Need a measurement from a non-flying builder |
|
|
Hey Don,
The guy that runs http://www.planeinnovations.com is planning to make
them up if he finds it practical. Phil Perry is sending him his
parts to make a test one. I think you could make them if you
wanted, and sell them. I'm not connected to planeinnovations.com
at all....I just hooked them up with the idea, and a person to
test it. I'll post something tomorrow probably to let people
know what's in the works. if you're interested in doing some,
feel free and don't let this step on you.
Tim
On 11/11/2010 4:46 PM, Don McDonald wrote:
| Quote: | Tim, so does that mean someone is going to fab them and then make them
availabel to all of us at a reasonable price??? Otherwise, I can make
them, and make them available for around $20. Was already heading down
that path with Pascal.... but if someone else is going to produce them,
great.
Don McDonald
--- On *Thu, 11/11/10, Tim Olson /<Tim(at)myrv10.com>/* wrote:
From: Tim Olson <Tim(at)myrv10.com>
Subject: Re: Need a measurement from a non-flying builder
To: rv10-list(at)matronics.com
Date: Thursday, November 11, 2010, 9:33 AM
<http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>>
That's cheaper than I would have guessed!
I did find a builder who offered to work with them
on getting the parts and checking it out, so I
think we should be set now. Cancel my request
for measurements. There's always someone who'll
step up and help!
Tim
On 11/11/2010 11:12 AM, Michael Kraus wrote:
>
Kraus<n223rv(at)wolflakeairport.net
<http://us.mc537.mail.yahoo.com/mc/compose?to=n223rv(at)wolflakeairport.net>>
>
> $17 from Vans, and it would be exact.... Just a thought....
>
> Sent from my iPhone
>
> On Nov 11, 2010, at 11:46 AM, Tim Olson<Tim(at)myrv10.com
<http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>> wrote:
>
>>
<http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>>
>>
>> Anyone have their landing gear wheel fairing parts,
>> that U-1010-L that we talked about, and not have
>> them mounted yet? I'm hoping to get the hole
>> to hole spacing measurement for the 3 bolt holes,
>> and maybe a tracing of the circular cutout and the
>> surrounding area. There's a vendor that would
>> like to get dimensions for a part to make it
>> more bullet proof, but he'd need to know the
>> shape, and hole spacing, so he can make a couple
>> of trial runs at it.
>>
>> Mine are all together and really tough to get at, or
>> I'd do it. But if you haven't mounted them yet,
>> it would be awesome to get a tracing of it.
>>
>> --
>> Tim Olson - RV-10 N104CD
>> do not archive
>>
>>
>>
>f="http://www.matronics.com/contribution"
target=_blank>http://www.matr -Mat
href="http://www.matronics.com/Navigator?RV10-List"
target=_blank>httphttp://forums.matronics.com/"
target=_blank>http://forums.matronics.com
*
*
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Tim Olson
Joined: 25 Jan 2007
Posts: 2879
|
| Posted: Thu Nov 11, 2010 4:53 pm Post subject: Need a measurement from a non-flying builder |
|
|
Heck, guess I don't have to write to the list tomorrow. 
Yep, so the guy from planeinnovations.com plans to pattern
the part, and thanks to Phil for helping. With luck, we'll
have at least one supplier soon. And hey, Don, if you
still want to do it, have at it. Right now, looking at
axle extensions, there were about 2 or 3 people who
did them before I did them, and then I came up with
the design that I did....and after making a pile of
them, that very same or very similar design is now offered
by at least 3 places. So, there's plenty of room for
competition in the marketplace. Keeps the price from
getting outrageous. In this case, the parts should
be very cheap, and once you fix it, it should be a
permanent thing. My wheel fairings are really solid
now.
Tim Olson - RV-10 N104CD
do not archive
On 11/11/2010 6:10 PM, Tim Olson wrote:
| Quote: |
Hey Don,
The guy that runs http://www.planeinnovations.com is planning to make
them up if he finds it practical. Phil Perry is sending him his
parts to make a test one. I think you could make them if you
wanted, and sell them. I'm not connected to planeinnovations.com
at all....I just hooked them up with the idea, and a person to
test it. I'll post something tomorrow probably to let people
know what's in the works. if you're interested in doing some,
feel free and don't let this step on you.
Tim
On 11/11/2010 4:46 PM, Don McDonald wrote:
> Tim, so does that mean someone is going to fab them and then make them
> availabel to all of us at a reasonable price??? Otherwise, I can make
> them, and make them available for around $20. Was already heading down
> that path with Pascal.... but if someone else is going to produce them,
> great.
> Don McDonald
>
> --- On *Thu, 11/11/10, Tim Olson /<Tim(at)myrv10.com>/* wrote:
> From: Tim Olson <Tim(at)myrv10.com>
> Subject: Re: Need a measurement from a non-flying builder
> To: rv10-list(at)matronics.com
> Date: Thursday, November 11, 2010, 9:33 AM
>
>
> <http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>>
>
> That's cheaper than I would have guessed!
>
> I did find a builder who offered to work with them
> on getting the parts and checking it out, so I
> think we should be set now. Cancel my request
> for measurements. There's always someone who'll
> step up and help!
> Tim
>
> On 11/11/2010 11:12 AM, Michael Kraus wrote:
> >
> Kraus<n223rv(at)wolflakeairport.net
> <http://us.mc537.mail.yahoo.com/mc/compose?to=n223rv(at)wolflakeairport.net>>
>
> >
> > $17 from Vans, and it would be exact.... Just a thought....
> >
> > Sent from my iPhone
> >
> > On Nov 11, 2010, at 11:46 AM, Tim Olson<Tim(at)myrv10.com
> <http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>> wrote:
> >
> >>
> <http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>>
> >>
> >> Anyone have their landing gear wheel fairing parts,
> >> that U-1010-L that we talked about, and not have
> >> them mounted yet? I'm hoping to get the hole
> >> to hole spacing measurement for the 3 bolt holes,
> >> and maybe a tracing of the circular cutout and the
> >> surrounding area. There's a vendor that would
> >> like to get dimensions for a part to make it
> >> more bullet proof, but he'd need to know the
> >> shape, and hole spacing, so he can make a couple
> >> of trial runs at it.
> >>
> >> Mine are all together and really tough to get at, or
> >> I'd do it. But if you haven't mounted them yet,
> >> it would be awesome to get a tracing of it.
> >>
> >> --
> >> Tim Olson - RV-10 N104CD
> >> do not archive
> >>
> >>
> >>
> >f="http://www.matronics.com/contribution"
> target=_blank>http://www.matr -Mat
> href="http://www.matronics.com/Navigator?RV10-List"
> target=_blank>httphttp://forums.matronics.com/"
> target=_blank>http://forums.matronics.com
>
> *
>
> *
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
partner14
Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas
|
| Posted: Thu Nov 11, 2010 6:14 pm Post subject: Need a measurement from a non-flying builder |
|
|
That's Paul.... I actually sent him all the parts I had left... at one point.... then his daughter lives in the Sacramento area, so he flew in and I picked him up to meet up with his daughter. (that was when we still lived there) Good guy... hope he can make them... if not, he'll probably contact me.
Don
--- On Thu, 11/11/10, Tim Olson <Tim(at)myrv10.com> wrote:
| Quote: |
From: Tim Olson <Tim(at)myrv10.com>
Subject: Re: Need a measurement from a non-flying builder
To: rv10-list(at)matronics.com
Date: Thursday, November 11, 2010, 4:10 PM
--> RV10-List message posted by: Tim Olson <Tim(at)myrv10.com>
Hey Don,
The guy that runs http://www.planeinnovations.com is planning to make
them up if he finds it practical. Phil Perry is sending him his
parts to make a test one. I think you could make them if you
wanted, and sell them. I'm not connected to planeinnovations.com
at all....I just hooked them up with the idea, and a person to
test it. I'll post something tomorrow probably to let people
know what's in the works. if you're interested in doing some,
feel free and don't let this step on you.
Tim
On 11/11/2010 4:46 PM, Don McDonald wrote:
| Quote: | Tim, so does that mean someone is going to fab them and then make them
availabel to all of us at a reasonable price??? Otherwise, I can make
them, and make them available for around $20. Was already heading down
that path with Pascal.... but if someone else is going to produce them,
great.
Don McDonald
--- On *Thu, 11/11/10, Tim Olson /<Tim(at)myrv10.com>/* wrote:
From: Tim Olson <Tim(at)myrv10.com>
Subject: Re: Need a measurement from a non-flying builder
To: rv10-list(at)matronics.com
Date: Thursday, November 11, 2010, 9:33 AM
--> RV10-List message posted by: Tim Olson <Tim(at)myrv10.com
<http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>>
That's cheaper than I would have guessed!
I did find a builder who offered to work with them
on getting the parts and checking it out, so I
think we should be set now. Cancel my request
for measurements. There's always someone who'll
step up and help!
Tim
On 11/11/2010 11:12 AM, Michael Kraus wrote:
> --> RV10-List message posted by: Michael
Kraus<n223rv(at)wolflakeairport.net
<http://us.mc537.mail.yahoo.com/mc/compose?to=n223rv(at)wolflakeairport.net>>
>
> $17 from Vans, and it would be exact.... Just a thought...
>
> Sent from my iPhone
>
> On Nov 11, 2010, at 11:46 AM, Tim Olson<Tim(at)myrv10.com
<http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>> wrote:
>
>> --> RV10-List message posted by: Tim Olson<Tim(at)myrv10.com
<http://us.mc537.mail.yahoo.com/mc/compose?to=Tim(at)myrv10.com>>
>>
>> Anyone have their landing gear wheel fairing parts,
>> that U-1010-L that we talked about, and not have
>> them mounted yet? I'm hoping to get the hole
>> to hole spacing measurement for the 3 bolt holes,
>> and maybe a tracing of the circular cutout and the
>> surrounding area. There's a vendor that would
>> like to get dimensions for a part to make it
>> more bullet proof, but he'd need to know the
>> shape, and hole spacing, so he can make a couple
>> of trial runs at it.
>>
>> Mine are all together and really tough to get at, or
>> I'd do it. But if you haven't mounted them yet,
>> it would be awesome to get a tracing of it.
>>
>> --
>> Tim Olson - RV-10 N104CD
>> do not archive
>>
>>
>>
>f="http://www.matronics.com/contribution"
target=_blank>http://www.matr -Mat
href="http://www.matronics.com/Navigator?RV10-List"
target=_blank>httphttp://forums.matronics.com/"
target=_blank>http://forums.matronics.com
*
>p; (And Get Some AWESOME FREE Gifts!onics.com/contribution" rel=nofollow target=_blank>http://www.matronicsp; -Matt Draator?RV10-List" rel=nofollow sp;-->
|
|
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Don A. McDonald
40636 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
