 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
john.marzulli(at)gmail.co
Guest
|
 Posted: Sun Jan 09, 2011 3:07 pm Post subject: Matco Gear Bolt Pattern? |
 |
|
I have decided to use the Grove gear instead of the Zenith supplied leaf.
Can anyone supply the bolt pattern for the stock Matco gear that Zenith supplies? I can't find the original Matco instructions.
Thanks,
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
 |
JohnDRead(at)aol.com
Guest
|
| Posted: Sun Jan 09, 2011 3:14 pm Post subject: Matco Gear Bolt Pattern? |
|
|
Hi John,
Disassemble the wheels and then spot through into the new gear. I do not recall the Matco instructions having any dimensions.
Regards, John
CH701 - Colorado - Jabiru 3300
Cell: 719-494-4567
Home: 303-648-3261
In a message dated 1/9/2011 4:07:48 P.M. Mountain Standard Time, john.marzulli(at)gmail.com writes:
| Quote: | I have decided to use the Grove gear instead of the Zenith supplied leaf.
Can anyone supply the bolt pattern for the stock Matco gear that Zenith supplies? I can't find the original Matco instructions.
Thanks,
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
| Quote: |
====================================
List href="http://www.matronics.com/Navigator?Zenith701801-List">http://www.matronics.com/Navigator?Zenith701801-List
====================================
ms.matronics.com/">http://forums.matronics.com
====================================
tp://www.matronics.com/contribution">http://www.matronics.com/contribution
====================================
|
|
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
dougsnash
Joined: 14 Apr 2008
Posts: 281
|
| Posted: Sun Jan 09, 2011 6:25 pm Post subject: Matco Gear Bolt Pattern? |
|
|
John, you are suposed to remove the axel from the wheel then use a transfer punch to center punch the gear spring through the bolt holes in the axle. There is no template for the Matco axels other than this.
Doug MacDonald
CH-701 C-GBQX
NW Ontario, Canada
Phase One
Do Not Archive
--- On Sun, 1/9/11, John Marzulli <john.marzulli(at)gmail.com> wrote:
| Quote: |
From: John Marzulli <john.marzulli(at)gmail.com>
Subject: Matco Gear Bolt Pattern?
To: zenith701801-list(at)matronics.com
Received: Sunday, January 9, 2011, 5:04 PM
I have decided to use the Grove gear instead of the Zenith supplied leaf.
Can anyone supply the bolt pattern for the stock Matco gear that Zenith supplies? I can't find the original Matco instructions.
Thanks,
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
| Quote: |
ist" rel=nofollow target=_blank>http://www.matronics.com/Navigator?Zenith701801-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
|
|
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
john.marzulli(at)gmail.co
Guest
|
| Posted: Sun Jan 09, 2011 8:37 pm Post subject: Matco Gear Bolt Pattern? |
|
|
I know you are supposed to transfer punch them, but I remember seeing a pattern in the Matco manual.
Can anyone confirm that the holes are 1.75" apart?
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
On Sun, Jan 9, 2011 at 6:14 PM, MacDonald Doug <dougsnash(at)yahoo.com (dougsnash(at)yahoo.com)> wrote:
[quote] John, you are suposed to remove the axel from the wheel then use a transfer punch to center punch the gear spring through the bolt holes in the axle. There is no template for the Matco axels other than this.
Doug MacDonald
CH-701 C-GBQX
NW Ontario, Canada
Phase One
Do Not Archive
--- On Sun, 1/9/11, John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)> wrote:
| Quote: |
ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
randy(at)rjhebertassoc.co
Guest
|
| Posted: Mon Jan 10, 2011 6:15 am Post subject: Matco Gear Bolt Pattern? |
|
|
Try
www.kobushweldingandmachining.com
Go to the aircraft tools
There is a drill guide that worked well for me.
Randall J Hebert
Randall J Hebert & Associates, Inc
Consulting Engineers
Ph 337-261-1976 Fx 337-261-1977
From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of John Marzulli
Sent: Sunday, January 09, 2011 10:34 PM
To: zenith701801-list(at)matronics.com
Subject: Re: Matco Gear Bolt Pattern?
I know you are supposed to transfer punch them, but I remember seeing a pattern in the Matco manual.
Can anyone confirm that the holes are 1.75" apart?
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
On Sun, Jan 9, 2011 at 6:14 PM, MacDonald Doug <dougsnash(at)yahoo.com (dougsnash(at)yahoo.com)> wrote:
John, you are suposed to remove the axel from the wheel then use a transfer punch to center punch the gear spring through the bolt holes in the axle. There is no template for the Matco axels other than this.
Doug MacDonald
CH-701 C-GBQX
NW Ontario, Canada
Phase One
Do Not Archive
--- On Sun, 1/9/11, John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)> wrote:
| Quote: | | ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801-Listtp://forums.matronics.com_blank">http://www.matronics.com/contribution |
0
123456789012345678
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
mikeweesner
Joined: 09 Aug 2008
Posts: 7
Location: nashville tn
|
| Posted: Mon Jan 10, 2011 7:40 am Post subject: Matco Gear Bolt Pattern? |
|
|
On Sun, 9 Jan 2011 18:14:49 -0800 (PST)
MacDonald Doug <dougsnash(at)yahoo.com> wrote:
| Quote: | John, you are suposed to remove the axel from the wheel
then use a transfer punch to center punch the gear spring
through the bolt holes in the axle. There is no template
for the Matco axels other than this.
Doug MacDonald
CH-701 C-GBQX
NW Ontario, Canada
Phase One
Do Not Archive
--- On Sun, 1/9/11, John Marzulli
<john.marzulli(at)gmail.com> wrote:
From: John Marzulli <john.marzulli(at)gmail.com>
Subject: Matco Gear Bolt Pattern?
To: zenith701801-list(at)matronics.com
Received: Sunday, January 9, 2011, 5:04 PM
I have decided to use the Grove gear instead of the
Zenith supplied leaf.
Can anyone supply the bolt pattern for the stock Matco
gear that Zenith supplies? I can't find the original
Matco instructions.
the template block that can be bought online is of great help
Thanks,
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
|
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
john.marzulli(at)gmail.co
Guest
|
| Posted: Mon Jan 10, 2011 8:46 am Post subject: Matco Gear Bolt Pattern? |
|
|
My point is that I want to get the axle pre-drilled by Grove, so I need to bolt pattern.
Thanks,
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
On Mon, Jan 10, 2011 at 7:36 AM, Mike Weesner <mikeweesner(at)multipro.com (mikeweesner(at)multipro.com)> wrote:
[quote] --> Zenith701801-List message posted by: "Mike Weesner" <mikeweesner(at)multipro.com (mikeweesner(at)multipro.com)>
On Sun, 9 Jan 2011 18:14:49 -0800 (PST)
MacDonald Doug <dougsnash(at)yahoo.com (dougsnash(at)yahoo.com)> wrote:
| Quote: | John, you are suposed to remove the axel from the wheel then use a transfer punch to center punch the gear spring through the bolt holes in the axle. There is no template for the Matco axels other than this.
Doug MacDonald
CH-701 C-GBQX
NW Ontario, Canada
Phase One
Do Not Archive
--- On Sun, 1/9/11, John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)> wrote:
From: John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)>
Subject: Matco Gear Bolt Pattern?
To: zenith701801-list(at)matronics.com (zenith701801-list(at)matronics.com)
Received: Sunday, January 9, 2011, 5:04 PM
I have decided to use the Grove gear instead of the Zenith supplied leaf.
Can anyone supply the bolt pattern for the stock Matco gear that Zenith supplies? I can't find the original Matco instructions.
the template block that can be bought online is of great help
Thanks,
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
|
===========
-List" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
n752ms(at)softcom.net
Guest
|
| Posted: Mon Jan 10, 2011 9:26 am Post subject: Matco Gear Bolt Pattern? |
|
|
If I was spending a thousand bucks on a landing gear from Grove
They had better know what the bolt pattern is or find out.
Mark S.
701/912uls
Sent from Mark's iPhone
On Jan 10, 2011, at 8:29 AM, John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)> wrote:
[quote]My point is that I want to get the axle pre-drilled by Grove, so I need to bolt pattern.
Thanks,
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
On Mon, Jan 10, 2011 at 7:36 AM, Mike Weesner <[url=mailto:mikeweesner(at)multipro.com]mikeweesner(at)multipro.com (mikeweesner(at)multipro.com)[/url]> wrote:
| Quote: | --> Zenith701801-List message posted by: "Mike Weesner" <[url=mailto:mikeweesner(at)multipro.com]mikeweesner(at)multipro.com (mikeweesner(at)multipro.com)[/url]>
On Sun, 9 Jan 2011 18:14:49 -0800 (PST)
MacDonald Doug <[url=mailto:dougsnash(at)yahoo.com]dougsnash(at)yahoo.com (dougsnash(at)yahoo.com)[/url]> wrote:
| Quote: | John, you are suposed to remove the axel from the wheel then use a transfer punch to center punch the gear spring through the bolt holes in the axle. There is no template for the Matco axels other than this.
Doug MacDonald
CH-701 C-GBQX
NW Ontario, Canada
Phase One
Do Not Archive
--- On Sun, 1/9/11, John Marzulli <[url=mailto:john.marzulli(at)gmail.com]john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)[/url]> wrote:
From: John Marzulli <[url=mailto:john.marzulli(at)gmail.com]john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)[/url]>
Subject: Matco Gear Bolt Pattern?
To: [url=mailto:zenith701801-list(at)matronics.com]zenith701801-list(at)matronics.com (zenith701801-list(at)matronics.com)[/url]
Received: Sunday, January 9, 2011, 5:04 PM
I have decided to use the Grove gear instead of the Zenith supplied leaf.
Can anyone supply the bolt pattern for the stock Matco gear that Zenith supplies? I can't find the original Matco instructions.
the template block that can be bought online is of great help
Thanks,
John Marzulli
http://MarzulliPhoto.net/
http://701Builder.blogspot.com/
|
===========
-List" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
|
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
