Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

JBM industries

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

williamtsullivan(at)att.n
Guest

Posted: Sun Dec 05, 2010 9:36 am Post subject: JBM industries

John- Thanks for the link to JBM.  Last year I put a new throttle cable grommet on the Bing 54, and it's cracked already without even running it. It was a Rotax part out of Lockwood.  Looks like I'll try the JBM parts.

  

                                                  Bill Sullivan

                                                  Windsor Locks, Ct.

                                                  FS 447

                                                  30 degrees, clear and windy 

 [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Dennis.Kirby(at)kirtland.
Guest

Posted: Tue Dec 07, 2010 10:21 am Post subject: JBM industries

Hauck wrote:  << BTW: I took advice from the List and bought the SS exhaust springs from:

http://jbmindustries.com/ROTAX.htm  I installed them a couple days ago ...  Only operational hours will tell if they are as good as advertised. >>

 

 

Kolb Friends –

 

JBM also sells after-market replacement rubber boots for the Bing carbs.  

 

Anybody have experience with these?  My 912 is due for new carb boots, and the Rotax boots are somewhat expensive.  The JBM website claims that their “exact replacement” part for this item will outlast the Rotax boot, at less than half the cost.

 

Am hoping someone on this List has bought these rubber boots from JBM, and can comment on their quality and longevity.

 

Many thanks –

 

Dennis Kirby

Mark-III, 912ul, Powerfin-72

Sandia Park, NM

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

smime.p7s

Description:

Download

Filename:

smime.p7s

Filesize:

5.03 KB

Downloaded:

205 Time(s)

zeprep251(at)aol.com
Guest

Posted: Tue Dec 07, 2010 12:35 pm Post subject: JBM industries

Dennis,

 I can assure you that JBM is very conservative in his claims and you will be pleased with the cost and performance of his stuff.

 Gary Aman 

 

   

 

  

   

 

   

 

  --

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum