Matronics Email Lists :: View topic - Vans RPM Transducer IE VTACHGEN 12

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Vans RPM Transducer IE VTACHGEN 12

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

longg(at)pjm.com
Guest

Posted: Wed Dec 15, 2010 12:35 pm Post subject: Vans RPM Transducer IE VTACHGEN 12

..



For a Lycoming IO-360 and a Dynon D180 the tach software setting is 4. I

assume similar for other Dynon products.



The Dynon has a left and right option. If you only have one VT, use the

left wire.



This setting jives perfectly with the Simpson display on my Plasma III.



Be sure to smooth the crimp on the collar of the cable end going into

the engine or it will catch on the casing and cause your RPM gauge to

read like my old Ford Galaxy 500. After a lot of catching it will break.



Glenn E. Long

--

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum