|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
dlpier(at)lamar.colostate Guest
|
Posted: Thu Jan 06, 2011 3:36 pm Post subject: elevator control fairlead |
|
|
Subject: Elevator control cable fairleads, part# 75C4-5
From: "Jimmy Young" <jdy100(at)comcast.net>
I mounted mine with a slot cut from the top side, since the cable was
already installed. You are lifting on the cable so there is no danger of
it coming out. I also had to cut a slot in the fuselage skin from the
hole
for the cable in an aft direction in order to give the cable clearance. I
then put a doubler over the area to restore what strength I lost(advised
by
Caleb).
Don Piermattei
N750DP
| - The Matronics Zenith750-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith750-List |
|
|
|
Back to top |
|
|
Jimmy Young
Joined: 24 Nov 2007 Posts: 182 Location: Missouri City, TX
|
Posted: Fri Jan 07, 2011 10:32 am Post subject: Re: elevator control fairlead |
|
|
Thanks for the help.
My upper cable also looks like it's going to be rubbing the aft side of the hole in the top-skin. Will deal with it in a similar manner.
Jimmy Y
Houston TX
| - The Matronics Zenith750-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith750-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|