Matronics Email Lists :: View topic - Mounting a d-sub connector to a bulkhead as a pass-through

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Mounting a d-sub connector to a bulkhead as a pass-through

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Sat Jan 15, 2011 8:20 pm Post subject: Mounting a d-sub connector to a bulkhead as a pass-through

At 01:52 PM 1/15/2011, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "jhclarkfl" <jhclarkfl(at)me.com>



 I will be using a d-sub connector on my removable rear Infinity Stick Grip.  One of the connectors will be secured to the covering I will be fabricating to close off the floor opening around the aft stick.  My problem is that I am not familiar with a means of securing one connector in this panel and yet still be able to screw in the other half of the connection onto the panel mounted connector.  Any suggestions and sources for the means of accomplishing this task? 	


   Take a look at the back of your computer. The stationary

   connector is fitted with jackscrew sockets



 [img]cid:7.1.0.9.0.20110115221237.01eb7900(at)aeroelectric.com.0[/img] 



   while the connector on the pendant cable is fitted

   with jack screws of some variety. We had some discussion

   here on the List a few months back about the convenience

   of 4-40 capscrews with recessed hex sockets. But this

   catalog page shows several of many alternatives.



  http://www.keyelco.com/pdfs/M55p74.pdf



 

        Bob . . .

                    //// 

                   (o o) 

    ===========o00o=(_)=o00o========= 

    < Go ahead, make my day . . .   > 

    < show me where I'm wrong.      > 

    =================================

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

1384739d.jpg

Description:

Filesize:

28.96 KB

Viewed:

2773 Time(s)

jhclarkfl

Joined: 17 Jan 2009
Posts: 9
Location: Pensacola, FL

Posted: Mon Jan 17, 2011 6:47 am Post subject: Re: Mounting a d-sub connector to a bulkhead as a pass-thr

That is exactly what I was looking for to make the connection. Thank you for your help and to all other responders!

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Jack Clark
RV-8A Fuselage
http://www.mykitlog.com/jackclark/

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum