nuckolls.bob(at)aeroelect Guest
|
Posted: Sat Jan 29, 2011 7:13 am Post subject: Questions about the 9005 Low Voltage Module |
|
|
At 09:33 AM 1/29/2011, you wrote:
Quote: | Update- my 9005 unit is working now. I replaced the reference diode
with another and all is well. I must have damaged the first one
somehow. If anyone else i planning on making one of these, let me
know. I have lots of extra parts from the digikey order minimums,
and a functioning test rig that I can send you for a few bucks in shipping.
|
Congratulations! You're now much further down
the path of a very steep learning curve. I hope
this experience encourages you to continue expanding
your horizons.
I've had an increased interest in the 9005 . . . in fact,
I had to order more bare boards. I'd planned to phase
it out entirely but it's a good starting point for
individuals who want to put their toes in the
electronic pond.
As you've discovered, the water only seems cold . . .
Bob . . .
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|