 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
herbgh(at)nctc.com
Guest
|
 Posted: Fri Feb 04, 2011 9:03 am Post subject: suds |
 |
|
Mike!!!
Beer has a lower freezing point!!  Herb
At 10:25 AM 2/4/2011, you wrote:
[quote]>Hi All,
>Is it just me or does any one else think that the kolb list is turning into a comercial for Viking
>engines?Frank
Frank,
I'm not sure I understand what you're getting at. I don't recall seeing anything about
Viking engines. In fact, I don't think I've ever heard of a Viking engine. What references
are there to these engines are there? I must have missed them. ????
Mike Welch
MkIII GEO turbo
PS I hope to be able to start my engine soon, but if it would warm up, it would be a lot
sooner!!! Sure is hard to get a lot done in my shop, when my soda pop freezes up solid.
(it really did!!!)
[b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
 |
mdnanwelch7(at)hotmail.co
Guest
|
| Posted: Fri Feb 04, 2011 9:51 am Post subject: suds |
|
|
>Mike!!!
| Quote: | Beer has a lower freezing point!! Herb
|
Herb,
Hahahahaha!! That it does, Herb, that it does!!!
Today, I'm taking hot coffee, tho. I'm trying to get that nosecone
ready for it's final installation.
I redid the airspeed indicator mount, after I walked into it a couple
of times. (and I was worried about the need to zap 10 year old kids. ha)
I backed it up about 3". Still will work fine, and not so easy to bump
into.
Mounted my comm radio antenna in the nosecone, too. Kind of funny
how the location works out. I used a 1/8" steel welding rod to make the antenna,
and mounted it where it sticks up through the nosecone about 3" ahead
of the Lexan windscreen. The rod protrudes about 4-5", so I bent the top
end into a little loop, perfect for tying a little length of yarn. Looks like
it was planned! Well, I guess it was!!
I've got a small project to complete before I can permanently mount the
nosecone. I have to make a little mounting device for the Dynon magnatometer
(for the EFIS). Easy job, shouldn't take but a few minutes.
Got to get at it!
Mike Welch
[quote] [b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
pj.ladd(at)btinternet.com
Guest
|
| Posted: Sat Feb 05, 2011 4:06 am Post subject: suds |
|
|
I redid the airspeed indicator mount, after I walked into it a couple of times.>>
Mike,
cut the probe off. Put a short piece of the appropriate diameter plastic tube over the stump. Reinsert the probe.
This makes a flexible hinge which can be walked into without causing damage.
But of course you knew that.
Cheers
Pat
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
