sprocket(at)vx-aviation.c Guest
|
Posted: Mon Feb 14, 2011 9:08 pm Post subject: Vx Aviation expands it's EFIS Wiring Hub Product Line |
|
|
This is a follow up to a previous announcement made on 'Lectric List. I've
been a long time follower and contributer, and I hope this is of interest to
many.
Thanks,
Vern Little
Vx Aviation www.vx-aviation.com
Summary of Announcement:
=========================
Vx Aviation Enhances EFIS Wiring Hub Family
VICTORIA, BC---February 15, 2011---Vx Aviation today announced the
introduction of three new AXIS™ wiring hub devices for the interconnect of
Electronic Flight Information Systems (EFIS) to other avionics and
instrumentation behind the instrument panel in owner-built aircraft.
The new AXIS-9A, AXIS-25A and GBX-25A join the previously announced AXIS-15A
to provide a complete family of wiring hubs. The AXIS-9A is specific to the
Dynon SkyView Network and functions as a multi-port splitter, providing a
9-wire backplane and allowing up to five SkyView Network compatible
instruments to be connected together. The AXIS-25A is a general-purpose
25-wire backplane with five connectors that facilitate the wiring of modern
avionics panels that have a large number of RS-232, ARINC-429 and similar
data interconnects, such as would be found on IFR panels. The GBX-25A is a
ground bus wiring block that simplifies the distribution of low-current
ground or power by providing 25 bused connections.
=========================
<for more information, including photographs and drawings, please see
attached document or our website>
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
Description: |
|
Download |
Filename: |
AXIS-ALL-110215.pdf |
Filesize: |
206.11 KB |
Downloaded: |
195 Time(s) |
|
|