Matronics Email Lists :: View topic - Governor control cable bracket

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Governor control cable bracket

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

carl.froehlich(at)verizon
Guest

Posted: Tue Feb 22, 2011 4:13 pm Post subject: Governor control cable bracket

I’m trying to figure out what to do for a governor bracket.  I’m using a PCU5000 governor and James plenum.  I purchased the bracket from Van’s but it is clocked wrong (ether pointed at the cylinder or pointed straight down).

 

How did others do this?

 

Carl

 

 

   [quote][b]

Kelly McMullen

Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

Posted: Tue Feb 22, 2011 4:56 pm Post subject: Governor control cable bracket

I think that is the exact combination Deems has on his tricked out Ten.



On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich

<carl.froehlich(at)verizon.net> wrote:

 	  Quote: 	
		   I’m trying to figure out what to do for a governor bracket.  I’m using a

 PCU5000 governor and James plenum.  I purchased the bracket from Van’s but

 it is clocked wrong (ether pointed at the cylinder or pointed straight

 down).



 How did others do this?



 Carl

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Tue Feb 22, 2011 5:36 pm Post subject: Governor control cable bracket

Here's a link to a set of       pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC04852.html

     

     Here's a link to some write ups that accompany the pics:     http://deemsrv10.com/FF2logindex.html

     

     Deems

     

     On 2/22/2011 5:46 PM, Kelly McMullen wrote:     [quote]        	  Quote: 	
		  --> RV10-List message posted by: Kelly McMullen <apilot2(at)gmail.com> (apilot2(at)gmail.com)



I think that is the exact combination Deems has on his tricked out Ten.



On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich

<carl.froehlich(at)verizon.net> (carl.froehlich(at)verizon.net) wrote:

          	  Quote: 	
		  I’m trying to figure out what to do for a governor bracket.  I’m using a

PCU5000 governor and James plenum.  I purchased the bracket from Van’s but

it is clocked wrong (ether pointed at the cylinder or pointed straight

down).



How did others do this?



Carl



	
       

	
     -- 

Deems Davis[b]

robin(at)PaintTheWeb.com
Guest

Posted: Tue Feb 22, 2011 6:03 pm Post subject: Governor control cable bracket

Ahhhh the good old days. Deems, do you miss having an airplane in the garage? 

To all those still building at home. One day you may be able to fit a car in your garage again. 

 

Robin 

Do Not Archive

  

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Deems Davis

 Sent: Tuesday, February 22, 2011 5:15 PM

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Subject: Re: Governor control cable bracket

  

Here's a link to a set of pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC04852.html

 

Here's a link to some write ups that accompany the pics: http://deemsrv10.com/FF2logindex.html



Deems



On 2/22/2011 5:46 PM, Kelly McMullen wrote:   	  Quote: 	
		  --> RV10-List message posted by: Kelly McMullen <apilot2(at)gmail.com> (apilot2(at)gmail.com) I think that is the exact combination Deems has on his tricked out Ten.

 On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich<carl.froehlich(at)verizon.net> (carl.froehlich(at)verizon.net) wrote:  	  Quote: 	
		  I’m trying to figure out what to do for a governor bracket.  I’m using aPCU5000 governor and James plenum.  I purchased the bracket from Van’s butit is clocked wrong (ether pointed at the cylinder or pointed straightdown).  	
0 	  Quote: 	
		    	
1 	  Quote: 	
		    	
2 	  Quote: 	
		    	
3 	  Quote: 	
		    	
4 	  Quote: 	
		    	
5 	  Quote: 	
		    	
6 	  Quote: 	
		    	
7 	  Quote: 	
		    	
8 	  Quote: 	
		    	
9 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
0 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
1 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
2 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
3 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
4 I think that is the exact combination Deems has on his tricked out Ten. 	
5 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
6 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
7 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
8 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
9 	  Quote: 	
		  

  	
0 	  Quote: 	
		  

  	
1

 	  Quote: 	
		  

  	
2 	  Quote: 	
		  

  	
3 	  Quote: 	
		  

  	
4 	  Quote: 	
		  

  	
5==============[/b][/quote] ,[/b][/quote] ?RV10-List">http://www.matronics.com/Navigator?RV10-List[/b]

 [/quote]6 	  Quote: 	
		  

  	
7 =                        t; http://www.matronics.com/contribution[/b][/quote] ==============[/b]

 [/quote]8 



No virus found in this message.

Checked by AVG - www.avg.com

Version: 10.0.1204 /  [quote][b]

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Tue Feb 22, 2011 6:34 pm Post subject: Governor control cable bracket

With all the freezing rain and snow here the last few weeks, both my wife and I are appreciative of having the cars in the garage.   The down size is that I have a twelve mile drive to an unheated hangar.  The build has slowed down a bit, but I’m anxious to when it starts getting warmer.  I’ll be almost living at the hangar to get things done this summer.   It won’t be done for Oshkosh, but will be done before fall.

 

Bob

 

 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

Sent: Tuesday, February 22, 2011 8:59 PM

To: rv10-list(at)matronics.com

Subject: RE: Governor control cable bracket

 

Ahhhh the good old days. Deems, do you miss having an airplane in the garage?

To all those still building at home. One day you may be able to fit a car in your garage again.

 

Robin

Do Not Archive

 [quote] [b]

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

n8zg(at)att.net
Guest

Posted: Tue Feb 22, 2011 6:58 pm Post subject: Governor control cable bracket

My airplane has been out of the garage for nearly three years.

I’m still hard-pressed to get a bicycle in far enough to air-up the tires…

 

neal

 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

Sent: Tuesday, February 22, 2011 7:59 PM

To: rv10-list(at)matronics.com

Subject: RE: Governor control cable bracket

 

Ahhhh the good old days. Deems, do you miss having an airplane in the garage?

To all those still building at home. One day you may be able to fit a car in your garage again.

 

Robin

Do Not Archive

 

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Deems Davis

Sent: Tuesday, February 22, 2011 5:15 PM

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Subject: Re: Governor control cable bracket

 

Here's a link to a set of pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC04852.html



Here's a link to some write ups that accompany the pics: http://deemsrv10.com/FF2logindex.html



Deems



On 2/22/2011 5:46 PM, Kelly McMullen wrote:  	  Quote: 	
		  --> RV10-List message posted by: Kelly McMullen <apilot2(at)gmail.com> (apilot2(at)gmail.com) I think that is the exact combination Deems has on his tricked out Ten.  On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich<carl.froehlich(at)verizon.net> (carl.froehlich(at)verizon.net) wrote: 	  Quote: 	
		  I’m trying to figure out what to do for a governor bracket.  I’m using aPCU5000 governor and James plenum.  I purchased the bracket from Van’s butit is clocked wrong (ether pointed at the cylinder or pointed straight 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
0 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
1 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
2 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
3 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
4 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
5I think that is the exact combination Deems has on his tricked out Ten. 	
6 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
7 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
8 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
9 	  Quote: 	
		   	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2

  	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6

==============

,

?RV10-List">http://www.matronics.com/Navigator?RV10-List 	  Quote: 	
		   	
7

=                        t; http://www.matronics.com/contribution

============== 	  Quote: 	
		   	
8



No virus found in this message.

Checked by AVG - www.avg.com

Version: 10.0.1204 /  	  Quote: 	
		   	
9 	  Quote: 	
		   	
0         - List Contribution Web generous nbsp;                        --> http://www.matronics.com/c=[/b] [/quote]1

  [quote][b]

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Tue Feb 22, 2011 7:04 pm Post subject: Governor control cable bracket

Funny thing, the cars are       in the garage, but its messier than it ever was with the airplane.       The hangar on the other hand is spotless  

       

       Deems

     

     On 2/22/2011 6:58 PM, Robin Marks wrote:      	  Quote: 	
		                                       

Ahhhh the good old days. Deems, do you miss having an             airplane in the garage?         

To all those still building at home. One day you may             be able to fit a car in your garage again.         

          

Robin         

Do Not Archive         

                                  

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)                 [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)]                 On Behalf Of Deems Davis

                 Sent: Tuesday, February 22, 2011 5:15 PM

                 To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

                 Subject: Re: Governor control cable                 bracket           

         

         

                     

Here's a link             to a set of pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC04852.html

           

           Here's a link to some write ups that accompany the pics: http://deemsrv10.com/FF2logindex.html

           

           Deems

           

           On 2/22/2011 5:46 PM, Kelly McMullen wrote:           	  Quote: 	
		  --> RV10-List message posted by: Kelly McMullen <apilot2(at)gmail.com> (apilot2(at)gmail.com) I think that is the exact combination Deems has on his tricked out Ten. On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich<carl.froehlich(at)verizon.net> (carl.froehlich(at)verizon.net) wrote:            	  Quote: 	
		  I’m trying to figure out what to do for a governor bracket.  I’m using aPCU5000 governor and James plenum.  I purchased the bracket from Van’s butit is clocked wrong (ether pointed at the cylinder or pointed straightdown).  	
0            	  Quote: 	
		    	
1            	  Quote: 	
		    	
2            	  Quote: 	
		    	
3            	  Quote: 	
		    	
4            	  Quote: 	
		    	
5            	  Quote: 	
		    	
6            	  Quote: 	
		    	
7            	  Quote: 	
		    	
8            	  Quote: 	
		    	
9            	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
0            	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
1            	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
2            	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
3            	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
4         I think that is the exact combination Deems has on his tricked out Ten. 	
5          	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
6          	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
7          	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
8          	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
9          	  Quote: 	
		    	
0          	  Quote: 	
		    	
1         



           

                   	  Quote: 	
		    	
2          	  Quote: 	
		    	
3          	  Quote: 	
		    	
4          	  Quote: 	
		    	
5         ==============         ,         ?RV10-List">http://www.matronics.com/Navigator?RV10-List          	  Quote: 	
		    	
6          	  Quote: 	
		    	
7         =                        t; http://www.matronics.com/contribution         ==============          	  Quote: 	
		    	
8                             

         

No virus found in this message.

           Checked by AVG - www.avg.com

           Version: 10.0.1204 /           	  Quote: 	
		    	
9       

     On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich 	
0       [quote][b]

jcumins(at)jcis.net
Guest

Posted: Tue Feb 22, 2011 8:14 pm Post subject: Governor control cable bracket

Boy do I every pay the right of passage having the garage full of RV-10 parts.  I get plenty of lip service when the wife has to scrape the ice off her windows at 6:30 in the morning.  I do volunteer to go scrape them but I am spoiled she says not thanks I can do it.

 

HEHEHE

 

 

 

John G. Cumins

President

 

[img]cid:image001.jpg(at)01CBD2CC.8C04D780[/img]

2499 B1 Martin Rd

Fairfield Ca 94534

707-425-7100

707-425-7576 Fax

 

Your Total Technology Solution Provider



 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Deems Davis

Sent: Tuesday, February 22, 2011 6:59 PM

To: rv10-list(at)matronics.com

Subject: Re: Governor control cable bracket

 

Funny thing, the cars are in the garage, but its messier than it ever was with the airplane. The hangar on the other hand is spotless  



Deems



On 2/22/2011 6:58 PM, Robin Marks wrote: 

Ahhhh the good old days. Deems, do you miss having an airplane in the garage?

To all those still building at home. One day you may be able to fit a car in your garage again.

 

Robin

Do Not Archive

 

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Deems Davis

Sent: Tuesday, February 22, 2011 5:15 PM

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Subject: Re: Governor control cable bracket

 

Here's a link to a set of pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC04852.html



Here's a link to some write ups that accompany the pics: http://deemsrv10.com/FF2logindex.html



Deems



On 2/22/2011 5:46 PM, Kelly McMullen wrote:  	  Quote: 	
		  --> RV10-List message posted by: Kelly McMullen <apilot2(at)gmail.com> (apilot2(at)gmail.com) I think that is the exact combination Deems has on his tricked out Ten. On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich<carl.froehlich(at)verizon.net> (carl.froehlich(at)verizon.net) wrote: 	  Quote: 	
		  I’m trying to figure out what to do for a governor bracket.  I’m using aPCU5000 governor and James plenum.  I purchased the bracket from Van’s butit is clocked wrong (ether pointed at the cylinder or pointed straightdown). 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
0 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
1 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
2 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
3 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
4I think that is the exact combination Deems has on his tricked out Ten. 	
5 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
6 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
7 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
8 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
9 	  Quote: 	
		   	
0 	  Quote: 	
		   	
1

  	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5

============== , ?RV10-List">http://www.matronics.com/Navigator?RV10-List  	  Quote: 	
		   	
6

=                        t; http://www.matronics.com/contribution ==============  	  Quote: 	
		   	
7



No virus found in this message.

Checked by AVG - www.avg.com

Version: 10.0.1204 /  	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich 	
0

 	  Quote: 	
		  On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich 	
1 	  Quote: 	
		  On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich 	
2 	  Quote: 	
		  On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich 	
3 	  Quote: 	
		  On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich 	
4<     - MATRONICS WEB FORUMS via the Web    --> http://forums.matronics.com         - List Contribution Web generous nbsp;                        --> http://www.matronics.com/c=[/b]On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich[/quote]5

image001.jpg

Description:

Filesize:

1.54 KB

Viewed:

3885 Time(s)

speckter(at)comcast.net
Guest

Posted: Wed Feb 23, 2011 5:44 am Post subject: Governor control cable bracket

From your mouth to my ears!!!  

   

Gary Specketer  

         

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Neal George

 Sent: Tuesday, February 22, 2011 9:56 PM

 To: rv10-list(at)matronics.com

 Subject: RE: Governor control cable bracket  

  

   

My airplane has been out of the garage for nearly three years.  

I’m still hard-pressed to get a bicycle in far enough to air-up the tires…  

   

neal  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

 Sent: Tuesday, February 22, 2011 7:59 PM

 To: rv10-list(at)matronics.com

 Subject: RE: Governor control cable bracket  

  

  

   

Ahhhh the good old days. Deems, do you miss having an airplane in the garage?  

To all those still building at home. One day you may be able to fit a car in your garage again.  

   

Robin  

Do Not Archive  

       

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Deems Davis

 Sent: Tuesday, February 22, 2011 5:15 PM

 To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

 Subject: Re: Governor control cable bracket  

  

  

   

Here's a link to a set of pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC04852.html

 

 Here's a link to some write ups that accompany the pics: http://deemsrv10.com/FF2logindex.html

 

 Deems

 

 On 2/22/2011 5:46 PM, Kelly McMullen wrote:    	  Quote: 	
		  --> RV10-List message posted by: Kelly McMullen <apilot2(at)gmail.com> I think that is the exact combination Deems has on his tricked out Ten.  On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich<carl.froehlich(at)verizon.net> wrote: 	  Quote: 	
		  I’m trying to figure out what to do for a governor bracket.  I’m using aPCU5000 governor and James plenum.  I purchased the bracket from Van’s butit is clocked wrong (ether pointed at the cylinder or pointed straight 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
0 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
1 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
2 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
3 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
4 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
5I think that is the exact combination Deems has on his tricked out Ten. 	
6 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
7 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
8 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
9 	  Quote: 	
		   	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2  

    	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6  

==============  

,  

?RV10-List">http://www.matronics.com/Navigator?RV10-List   	  Quote: 	
		   	
7  

=                        t; http://www.matronics.com/contribution  

==============   	  Quote: 	
		   	
8      

  

No virus found in this message.

 Checked by AVG - www.avg.com

 Version: 10.0.1204 /    	  Quote: 	
		   	
9 	  Quote: 	
		   	
0  

<nbsp;    - MATRONICS WEB FORUMS via the Web    --> http://forums.matronics.com        - List Contribution Web generous nbsp;                        --> http://www.matronics.com/c=   	  Quote: 	
		   	
1  

   

      	  Quote: 	
		   	
2   [quote][b]

carl.froehlich(at)verizon
Guest

Posted: Wed Feb 23, 2011 3:12 pm Post subject: Governor control cable bracket

Thanks Deems – perfect.

 

Carl

 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Deems Davis

Sent: Tuesday, February 22, 2011 8:15 PM

To: rv10-list(at)matronics.com

Subject: Re: Governor control cable bracket

 

Here's a link to a set of pictures that should be self explanatory: http://deemsrv10.com/album/Sec%20FF2%20Baffling%20and%20Plenum/slides/DSC04852.html



Here's a link to some write ups that accompany the pics: http://deemsrv10.com/FF2logindex.html



Deems



On 2/22/2011 5:46 PM, Kelly McMullen wrote:  	  Quote: 	
		  --> RV10-List message posted by: Kelly McMullen <apilot2(at)gmail.com> (apilot2(at)gmail.com) I think that is the exact combination Deems has on his tricked out Ten. On Tue, Feb 22, 2011 at 5:10 PM, Carl Froehlich<carl.froehlich(at)verizon.net> (carl.froehlich(at)verizon.net) wrote: 	  Quote: 	
		  I’m trying to figure out what to do for a governor bracket.  I’m using aPCU5000 governor and James plenum.  I purchased the bracket from Van’s butit is clocked wrong (ether pointed at the cylinder or pointed straightdown). 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
0 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
1 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
2 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
3 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
4I think that is the exact combination Deems has on his tricked out Ten. 	
5 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
6 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
7 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
8 	  Quote: 	
		  I think that is the exact combination Deems has on his tricked out Ten. 	
9 	  Quote: 	
		   	
0 	  Quote: 	
		   	
1

 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5         - List Contribution Web generous nbsp;                        --> http://www.matronics.com/c=[/b] [/quote]6

   [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum