 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
kees de bussy
Joined: 16 Jul 2009
Posts: 18
Location: the netherlands
|
 Posted: Tue Mar 08, 2011 5:07 am Post subject: flap drive pin engagement |
 |
|
In my case the flap drive pins engagement comply with the service bulletin on that matter but at the portside it is at the limit. So I decide the bring it well within the limits and I purchased the special bearing housing from Europa Aircraft.
I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing.
Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome.
Kees de Bussy
PH-SBR
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
dpark748(at)hotmail.co.uk
Guest
|
| Posted: Tue Mar 08, 2011 6:40 am Post subject: flap drive pin engagement |
|
|
Replaced my bearing housings with heat gun, and turned bearing with mole and levered with screwdriver on edge - no problem.
Dave G-LDVO
> Subject: flap drive pin engagement
| Quote: | From: keesdebussy(at)hotmail.com
Date: Tue, 8 Mar 2011 05:07:30 -0800
To: europa-list(at)matronics.com
--> Europa-List message posted by: "kees de bussy" <keesdebussy(at)hotmail.com>
In my case the flap drive pins engagement comply with the service bulletin on that matter but at the portside it is at the limit. So I decide the bring it well within the limits and I purchased the special bearing housing from Europa Aircraft.
I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing.
Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome.
Kees de Bussy
PH-SBR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=333147#333147
>================
|
[quote]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
kees de bussy
Joined: 16 Jul 2009
Posts: 18
Location: the netherlands
|
| Posted: Wed Mar 09, 2011 2:18 am Post subject: Re: flap drive pin engagement |
|
|
Thanks Dave for your input. I will give it another try. It sounds if you did not needed a lot of force to make it move. Is that correct ? Kees de Bussy PH-SBR
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
dpark748(at)hotmail.co.uk
Guest
|
| Posted: Wed Mar 09, 2011 2:43 am Post subject: flap drive pin engagement |
|
|
Just needed heat gun and gripped the edge of the housing with mole wrench and turned, once loose can be levered and turned out easily.
Dave
> Subject: Re: flap drive pin engagement
>===
[quote]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
dpark748(at)hotmail.co.uk
Guest
|
| Posted: Wed Mar 09, 2011 10:43 am Post subject: flap drive pin engagement |
|
|
correct,
Dave
> Subject: Re: flap drive pin engagement
>===
[quote]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
jrgowing(at)bigpond.net.a
Guest
|
| Posted: Thu Mar 10, 2011 4:01 pm Post subject: flap drive pin engagement |
|
|
David Park
Would you please quote what Service Bulletin No refers, and your kit number so we can see if this concerns other builders?
JR (bob) Gowing Kit no 327 in Oz
Do not archive
From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of david park
Sent: Wednesday, 9 March 2011 1:37 AM
To: europa-list(at)matronics.com
Subject: RE: flap drive pin engagement
Replaced my bearing housings with heat gun, and turned bearing with mole and levered with screwdriver on edge - no problem.
Dave G-LDVO
| Quote: | Subject: flap drive pin engagement
From: keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)
Date: Tue, 8 Mar 2011 05:07:30 -0800
To: europa-list(at)matronics.com (europa-list(at)matronics.com)
--> Europa-List message posted by: "kees de bussy" <keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)>
In my case the flap drive pins engagement comply with the service bulletin on that matter but at the portside it is at the limit. So I decide the bring it well within the limits and I purchased the special bearing housing from Europa Aircraft.
I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing.
Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome.
Kees de Bussy
PH-SBR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=333147#333147
================
| Quote: | | http://www.matronics.com/Navigator?Europa-List |
01234567
|
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / 03/09/11
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
Ivor Phillips
Joined: 16 Jan 2006
Posts: 253
Location: London UK
|
| Posted: Fri Mar 11, 2011 1:27 am Post subject: flap drive pin engagement |
|
|
Hi Bob
the Service Bulletin is SB 16
find PDF file attached
Ivor
On 10 March 2011 23:57, JR Gowing <jrgowing(at)bigpond.net.au (jrgowing(at)bigpond.net.au)> wrote:
| Quote: |
David Park
Would you please quote what Service Bulletin No refers, and your kit number so we can see if this concerns other builders?
JR (bob) Gowing Kit no 327 in Oz
Do not archive
From: owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com) [mailto:owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)] On Behalf Of david park
Sent: Wednesday, 9 March 2011 1:37 AM
To: europa-list(at)matronics.com (europa-list(at)matronics.com)
Subject: RE: flap drive pin engagement
Replaced my bearing housings with heat gun, and turned bearing with mole and levered with screwdriver on edge - no problem.
Dave G-LDVO
| Quote: | --> Europa-List message posted by: "kees de bussy" <keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)>
In my case the flap drive pins engagement comply with the service bulletin on that matter but at the portside it is at the limit. So I decide the bring it well within the limits and I purchased the special bearing housing from Europa Aircraft.
>
|
| Quote: | I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing.
>
|
| Quote: | Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome.
Kees de Bussy
PH-SBR
Read this topic online here:
>
|
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / 03/09/11
8
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
|
Download |
| Filename: |
Sb_16.pdf |
| Filesize: |
9.14 KB |
| Downloaded: |
257 Time(s) |
|
|
| Back to top |
|
|
dpark748(at)hotmail.co.uk
Guest
|
| Posted: Fri Mar 11, 2011 3:48 am Post subject: flap drive pin engagement |
|
|
Bob,
Someone else has quoted the SB No. I changed mine during build when I had to adjust length of cross tube.
Dave
From: jrgowing(at)bigpond.net.au
To: europa-list(at)matronics.com
Subject: RE: flap drive pin engagement
Date: Fri, 11 Mar 2011 10:57:23 +1100
.ExternalClass .ecxshape {;} .ExternalClass p.ecxMsoNormal, .ExternalClass li.ecxMsoNormal, .ExternalClass div.ecxMsoNormal {margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman','serif';} .ExternalClass a:link, .ExternalClass span.ecxMsoHyperlink {color:blue;text-decoration:underline;} .ExternalClass a:visited, .ExternalClass span.ecxMsoHyperlinkFollowed {color:purple;text-decoration:underline;} .ExternalClass p {margin-right:0cm;margin-left:0cm;font-size:12.0pt;font-family:'Times New Roman','serif';} .ExternalClass pre {margin-bottom:.0001pt;font-size:10.0pt;font-family:'Courier New';} .ExternalClass span.ecxHTMLPreformattedChar {font-family:Consolas;} .ExternalClass span.ecxEmailStyle20 {font-family:'Calibri','sans-serif';color:#1F497D;} .ExternalClass .ecxMsoChpDefault {font-size:10.0pt;} (at)page WordSection1 {size:612.0pt 792.0pt;} .ExternalClass div.ecxWordSection1 {page:WordSection1;}
David Park
Would you please quote what Service Bulletin No refers, and your kit number so we can see if this concerns other builders?
JR (bob) Gowing Kit no 327 in Oz
Do not archive
From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of david park
Sent: Wednesday, 9 March 2011 1:37 AM
To: europa-list(at)matronics.com
Subject: RE: Europa-List: flap drive pin engagement
Replaced my bearing housings with heat gun, and turned bearing with mole and levered with screwdriver on edge - no problem.
Dave G-LDVO
| Quote: | Subject: flap drive pin engagement
From: keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)
Date: Tue, 8 Mar 2011 05:07:30 -0800
To: europa-list(at)matronics.com (europa-list(at)matronics.com)
--> Europa-List message posted by: "kees de bussy" <keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)>
In my case the flap drive pins engagement comply with the service bulletin on that matter but at the portside it is at the limit. So I decide the bring it well within the limits and I purchased the special bearing housing from Europa Aircraft.
I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing.
Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome.
Kees de Bussy
PH-SBR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=333147#333147
================
| Quote: | | http://www.matronics.com/Navigator?Europa-List |
01234567
|
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / 03/09/11
8 [quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
jrgowing(at)bigpond.net.a
Guest
|
| Posted: Fri Mar 11, 2011 6:26 pm Post subject: flap drive pin engagement |
|
|
Thank you Ivor!
Now I can find it in my records. I remembered the issue from what seems like a long time ago.
I wlll now be able to put my finger on what I did.
Bob Gowing kit 327 in Oz
Do not archive
From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of PHILLIPS I
Sent: Friday, 11 March 2011 8:24 PM
To: europa-list(at)matronics.com
Subject: Re: flap drive pin engagement
Hi Bob
the Service Bulletin is SB 16
find PDF file attached
Ivor
On 10 March 2011 23:57, JR Gowing <jrgowing(at)bigpond.net.au (jrgowing(at)bigpond.net.au)> wrote:
David Park
Would you please quote what Service Bulletin No refers, and your kit number so we can see if this concerns other builders?
JR (bob) Gowing Kit no 327 in Oz
Do not archive
From: owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com) [mailto:owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)] On Behalf Of david park
Sent: Wednesday, 9 March 2011 1:37 AM
To: europa-list(at)matronics.com (europa-list(at)matronics.com)
Subject: RE: flap drive pin engagement
Replaced my bearing housings with heat gun, and turned bearing with mole and levered with screwdriver on edge - no problem.
Dave G-LDVO
| Quote: | Subject: flap drive pin engagement
From: keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)
Date: Tue, 8 Mar 2011 05:07:30 -0800
To: europa-list(at)matronics.com (europa-list(at)matronics.com)
--> Europa-List message posted by: "kees de bussy" <keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)>
In my case the flap drive pins engagement comply with the service bulletin on that matter but at the portside it is at the limit. So I decide the bring it well within the limits and I purchased the special bearing housing from Europa Aircraft.
I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing.
Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome.
Kees de Bussy
PH-SBR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=333147#333147
================
|
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / 03/09/11
01
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / 03/11/11
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
jrgowing(at)bigpond.net.a
Guest
|
| Posted: Sat Mar 12, 2011 3:38 pm Post subject: flap drive pin engagement |
|
|
Thank you Dave!
Yes it is on my “to do” list and I have not mounted the wings since the service bulleting was issued!
No I won’t lose the list!
JR (Bob) Gowing UK Kit 327 in Oz
Do not archive
From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of david park
Sent: Friday, 11 March 2011 10:45 PM
To: europa-list(at)matronics.com
Subject: RE: flap drive pin engagement
Bob,
Someone else has quoted the SB No. I changed mine during build when I had to adjust length of cross tube.
Dave
From: jrgowing(at)bigpond.net.au
To: europa-list(at)matronics.com
Subject: RE: flap drive pin engagement
Date: Fri, 11 Mar 2011 10:57:23 +1100
David Park
Would you please quote what Service Bulletin No refers, and your kit number so we can see if this concerns other builders?
JR (bob) Gowing Kit no 327 in Oz
Do not archive
From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of david park
Sent: Wednesday, 9 March 2011 1:37 AM
To: europa-list(at)matronics.com
Subject: RE: flap drive pin engagement
Replaced my bearing housings with heat gun, and turned bearing with mole and levered with screwdriver on edge - no problem.
Dave G-LDVO
| Quote: | Subject: flap drive pin engagement
From: keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)
Date: Tue, 8 Mar 2011 05:07:30 -0800
To: europa-list(at)matronics.com (europa-list(at)matronics.com)
--> Europa-List message posted by: "kees de bussy" <keesdebussy(at)hotmail.com (keesdebussy(at)hotmail.com)>
In my case the flap drive pins engagement comply with the service bulletin on that matter but at the portside it is at the limit. So I decide the bring it well within the limits and I purchased the special bearing housing from Europa Aircraft.
I have now a problem to remove the original housing and bearing from the x-tube. The x-tube end was heated with a hot air gun (air of 600 degr. C / 1110 degr. F) but I could not get any movement of the bearing housing.
Has anybody experience in removeing the bearing housing from the X-tube ? Any ideas are welcome.
Kees de Bussy
PH-SBR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=333147#333147
================
|
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / 03/09/11
01234567890123456789
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / 03/11/11
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
