 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
klwerner(at)comcast.net
Guest
|
 Posted: Wed Mar 09, 2011 10:26 am Post subject: RV-8a Engraving |
 |
|
Thank you for the info. That is good to know!!! Konrad
do not archive
On Mar 9, 2011, at 8:53 AM, japhillipsga(at)aol.com (japhillipsga(at)aol.com) wrote:
[quote]
Dear Builder Buds, no the list is not dead. Some of us are just too damned busy building to write about it. I had some engraving done yesterday and I wanted to share it with you all. Sorry for the photos blur. I think the product is great, service was superb and friendly and price was 30% less than Bill's Engraving that Matt D. used. The fellow that runs the place is Mr. Joe, nice guy who says he spent his airforce time hanging bombs and rockets on F4s in V mam. Great guy! You can see his card/ letter head in one of the photos. I was impressed by the work and recommend his shop. He can also do self stick vinyl letters, numbers and words for cockpit markings. Best regards, Bill of Georgia
<plane_2.bmp><po.bmp>[b]
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
 |
flyboy.bob(at)gmail.com
Guest
|
| Posted: Thu Mar 10, 2011 7:33 am Post subject: RV-8a Engraving |
|
|
I used a place called Aircraft Engraver in Granby, CT http://www.engravers.net/aircraft/fp_list.htm they did a great job, promptly, at a fair price. They also do fuel caps and placards.
Regards,
Bob Christensen – N83RC – waiting for the inspector!
From: japhillipsga(at)aol.com (japhillipsga(at)aol.com)
Sent: Wednesday, March 09, 2011 9:53 AM
To: rv8-list(at)matronics.com (rv8-list(at)matronics.com)
Subject: RV-8a Engraving
Dear Builder Buds, no the list is not dead. Some of us are just too damned busy building to write about it. I had some engraving done yesterday and I wanted to share it with you all. Sorry for the photos blur. I think the product is great, service was superb and friendly and price was 30% less than Bill's Engraving that Matt D. used. The fellow that runs the place is Mr. Joe, nice guy who says he spent his airforce time hanging bombs and rockets on F4s in V mam. Great guy! You can see his card/ letter head in one of the photos. I was impressed by the work and recommend his shop. He can also do self stick vinyl letters, numbers and words for cockpit markings. Best regards, Bill of Georgia
[quote][b]
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
|
Robin(at)PaintTheWeb.com
Guest
|
| Posted: Thu Mar 10, 2011 8:49 am Post subject: RV-8a Engraving |
|
|
I agree sort of… I have had a lot of engraving done by this group with generally good results. However my last experience was about a 4 month ordeal where items were mixed up and my order was split so that a couple of items were set aside and got separated from my order. Then a number of switches were engraved in different size fonts so they look kind of odd next to each other. Then 5 weeks later my carbon fiber safety switch covers had not shown up so I called and they didn’t know this covers were mine. That took another 4 weeks to complete (two covers). So ultimately 3 shipments charged at more than market value for my one order.
Something may have changed over there because I felt the need to stay on top of them after 6 weeks went by with no activity.
Robin
Do Not Archive
From: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com) [mailto:owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)] On Behalf Of FLYBOY.BOB
Sent: Thursday, March 10, 2011 7:31 AM
To: rv8-list(at)matronics.com (rv8-list(at)matronics.com)
Subject: Re: RV-8a Engraving
I used a place called Aircraft Engraver in Granby, CT http://www.engravers.net/aircraft/fp_list.htm they did a great job, promptly, at a fair price. They also do fuel caps and placards.
Regards,
Bob Christensen – N83RC – waiting for the inspector!
From: japhillipsga(at)aol.com (japhillipsga(at)aol.com)
Sent: Wednesday, March 09, 2011 9:53 AM
To: rv8-list(at)matronics.com (rv8-list(at)matronics.com)
Subject: RV-8a Engraving
Dear Builder Buds, no the list is not dead. Some of us are just too damned busy building to write about it. I had some engraving done yesterday and I wanted to share it with you all. Sorry for the photos blur. I think the product is great, service was superb and friendly and price was 30% less than Bill's Engraving that Matt D. used. The fellow that runs the place is Mr. Joe, nice guy who says he spent his airforce time hanging bombs and rockets on F4s in V mam. Great guy! You can see his card/ letter head in one of the photos. I was impressed by the work and recommend his shop. He can also do self stick vinyl letters, numbers and words for cockpit markings. Best regards, Bill of Georgia
[/b][/quote] RV8-List Email Forum -[/b]st Un/Subscription,[/quote] Day Browse, Chat, FAQ,[/b]w.matronics.com/Navigator?RV8-List">http://www.matronics.com/Navigator?RV8-b>
=====================< - MATRONICS WEB FORUMS -[/b][/quote] m">http://forums.matronics.com[/b][/quote] -Matt Dralle, List A; http://www.matronics.com/contribution[/b][/quote] =======================[/b] [/quote]
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
|
cs(at)charlesstringham.co
Guest
|
| Posted: Thu Mar 10, 2011 11:42 am Post subject: RV-8a Engraving |
|
|
Does anyone know of aftermarket rudder pedals for the RV-8? I recall seeing a really cool looking set at Oshkosh a couple of years ago, but can't recall the vendor.
Thanks, Chet Stringham
Sent from my Verizon Wireless BlackBerry
--
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
|
endspeed(at)yahoo.com
Guest
|
| Posted: Thu Mar 10, 2011 12:16 pm Post subject: RV-8a Engraving |
|
|
Cleaveland Tools has a custom set.
Sent from my iPhone
On Mar 10, 2011, at 14:22, cs(at)charlesstringham.com (cs(at)charlesstringham.com) wrote:
[quote]Does anyone know of aftermarket rudder pedals for the RV-8? I recall seeing a really cool looking set at Oshkosh a couple of years ago, but can't recall the vendor.
Thanks, Chet Stringham
Sent from my Verizon Wireless BlackBerryFrom: Robin Marks <Robin(at)PaintTheWeb.com (Robin(at)PaintTheWeb.com)>
Sender: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)
Date: Thu, 10 Mar 2011 08:46:33 -0800
To: <rv8-list(at)matronics.com (rv8-list(at)matronics.com)>
ReplyTo: rv8-list(at)matronics.com (rv8-list(at)matronics.com)
Subject: RE: RV-8a Engraving
I agree sort of=85 I = have had a lot of engraving done by this group with generally good results.= However my last experience was about a 4 month ordeal where items were mix= ed up and my order was split so that a couple of items were set aside and g= ot separated from my order. Then a number of switches were engraved in diff= erent size fonts so they look kind of odd next to each other. Then 5 weeks = later my carbon fiber safety switch covers had not shown up so I called and= they didn=92t know this covers were mine. That took another 4 weeks to com= plete (two covers). So ultimately 3 shipments charged at more than market v= alue for my one order.
Something may have changed over there becaus= e I felt the need to stay on top of them after 6 weeks went by with no acti= vity.
=A0
Robin
Do Not Archive
=A0
From: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)] On Behalf Of = FLYBOY.BOB
Sent: Thursday, March 10, 2011 7:31 AM
To: rv8-list(at)matronics.com (rv8-list(at)matronics.com)
Subject: Re= : RV-8a Engraving
= =A0
I us= ed a place called Aircraft Engraver in Granby, CT [url=3D"http://www.eng=]http://www.engravers.net/a= ircraft/fp_list.htm[/url] they did a great j= ob, promptly, at a fair price.=A0 They also do fuel caps and placards.
=A0
Regards,
Bob Chri= stensen =96 N83RC =96 waiting for the inspector!
=A0
From: psga(at)aol.com (psga(at)aol.com)
Sent: Wednesday, March= 09, 2011 9:53 AM
To: [url=3D"mailto:=]rv8-list(at)matronics= .com[/url]
Subject: RV-= 8a Engraving
=A0
<= /div>
=A0
Dear Builder Buds, no the list = is not dead. Some of us are just too damned busy building to write about it= . I had some engraving done yesterday and I wanted to share it with you all= . Sorry for the photos blur. I think the product is great, service was supe= rb and friendly and price was 30% less than Bill's Engraving that Matt = D. used. The fellow that runs the place is Mr. Joe, nice guy who says he sp= ent his airforce time hanging bombs and rockets on F4s in V mam. Great guy!= You can see his card/ letter head in one of the photos. I was impressed by= the work and recommend his shop. He can also do self stick vinyl letters, = numbers and words for cockpit markings. Best regards, Bill of Georgia
RV8-List Email Forum - | Quote: | =
st Un/Subscription, |
Day Browse, Chat, FAQ, | Quote: | =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<=
=A0=A0=A0=A0=A0 - MATRONICS WEB FORUMS - |
m">http://forums.matronics.com =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 -Matt Dralle, List A= ; [url=3D"http://www.matronics.com/contribution"]http://www.matronics.co=[/url] m/contribution =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
¦·›~‰Ã²,ÞÙÊ%¢½4ÓM4}§ r‹«‰êç{(º¸ž
[b]
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
|
william_slaughter(at)att.
Guest
|
| Posted: Thu Mar 10, 2011 3:14 pm Post subject: RV-8a Engraving |
|
|
The custom pedals currently listed on the Cleaveland website are for the side-by-side RVs only.
William
From: owner-rv8-list-server(at)matronics.com [mailto:owner-rv8-list-server(at)matronics.com] On Behalf Of Robert Sultzbach
Sent: Thursday, March 10, 2011 2:13 PM
To: rv8-list(at)matronics.com
Subject: Re: RV-8a Engraving
Cleaveland Tools has a custom set.
Sent from my iPhone
On Mar 10, 2011, at 14:22, cs(at)charlesstringham.com (cs(at)charlesstringham.com) wrote:
| Quote: |
Does anyone know of aftermarket rudder pedals for the RV-8? I recall seeing a really cool looking set at Oshkosh a couple of years ago, but can't recall the vendor.
Thanks, Chet Stringham
Sent from my Verizon Wireless BlackBerry
From: Robin Marks <Robin(at)PaintTheWeb.com (Robin(at)PaintTheWeb.com)>
Sender: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)
Date: Thu, 10 Mar 2011 08:46:33 -0800
To: <rv8-list(at)matronics.com (rv8-list(at)matronics.com)>
ReplyTo: rv8-list(at)matronics.com (rv8-list(at)matronics.com)
Subject: RE: RV-8a Engraving
I agree sort of=85 I = have had a lot of engraving done by this group with generally good results.= However my last experience was about a 4 month ordeal where items were mix= ed up and my order was split so that a couple of items were set aside and g= ot separated from my order. Then a number of switches were engraved in diff= erent size fonts so they look kind of odd next to each other. Then 5 weeks = later my carbon fiber safety switch covers had not shown up so I called and= they didn=92t know this covers were mine. That took another 4 weeks to com= plete (two covers). So ultimately 3 shipments charged at more than market v= alue for my one order.
Something may have changed over there becaus= e I felt the need to stay on top of them after 6 weeks went by with no acti= vity.
=A0
Robin
Do Not Archive
=A0
From: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)] On Behalf Of = FLYBOY.BOB
Sent: Thursday, March 10, 2011 7:31 AM
To: rv8-list(at)matronics.com (rv8-list(at)matronics.com)
Subject: Re= : RV-8a Engraving
= =A0
I us= ed a place called Aircraft Engraver in Granby, CT [url=3D%22http:/www.eng=]http://www.engravers.net/a= ircraft/fp_list.htm[/url] they did a great j= ob, promptly, at a fair price.=A0 They also do fuel caps and placards.
=A0
Regards,
Bob Chri= stensen =96 N83RC =96 waiting for the inspector!
=A0
From: japhilli= psga(at)aol.com (psga(at)aol.com)
Sent: Wednesday, March= 09, 2011 9:53 AM
To: [url=3D%22mailto:=]rv8-list(at)matronics= .com[/url]
Subject: RV-= 8a Engraving
=A0
<= /div>
=A0
Dear Builder Buds, no the list = is not dead. Some of us are just too damned busy building to write about it= . I had some engraving done yesterday and I wanted to share it with you all= . Sorry for the photos blur. I think the product is great, service was supe= rb and friendly and price was 30% less than Bill's Engraving that Matt = D. used. The fellow that runs the place is Mr. Joe, nice guy who says he sp= ent his airforce time hanging bombs and rockets on F4s in V mam. Great guy!= You can see his card/ letter head in one of the photos. I was impressed by= the work and recommend his shop. He can also do self stick vinyl letters, = numbers and words for cockpit markings. Best regards, Bill of Georgia
RV8-List Email Forum - | Quote: | | =st Un/Subscription, |
Day Browse, Chat, FAQ,
m">http://forums.matronics.com
=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 -Matt Dralle, List A= ; http://www.matronics.co= m/contribution =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D012
¦·›~‰Ã²,ÞÙÊ%¢½4ÓM4}§‑r‹«‰êç{(º¸ž
=A0 |
34567890123456789 | Quote: | | st Un/Subscription, |
0 | Quote: | | st Un/Subscription, |
1 | Quote: | | st Un/Subscription, |
2 | Quote: | | st Un/Subscription, |
3 | Quote: | | st Un/Subscription, |
4 | Quote: | | st Un/Subscription, |
5 | Quote: | | st Un/Subscription, |
6
[quote][b]
| | - The Matronics RV8-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV8-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
