KeysFox
Joined: 05 Jan 2009 Posts: 137
|
Posted: Thu Mar 17, 2011 4:46 am Post subject: Purging 912 not required? |
|
|
If anyone figures out what year or serial number was the cut off for not
needeing to do the oil purge please post it.
Thanks
BJ
earely 912
Quote: | Lucian,
I bought a small low pressure regulator at Harbour Freight and made my
own kit for low air pressure on the oil tank. Attached it at the end of
the
hose with a quick disconnect
Also,I have done the valve lifter check on my engine at least 5 times
because of the problem I was having with the prop flipping backwards about
3
revolutions at shutdown.( I thought about putting Velcro to fasten my
cowl
vs Dzus buttons) I fixed that problem by removing the Warp and
installing a
lighter Kiev prop. The valve covers have been removed that many times and
the old seals reused. They have not leaked so I don't think you will have
a
problem.
Be careful you don,t drop the valve covers.
Dick Maddux
Milton,Fl
|
| - The Matronics RotaxEngines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RotaxEngines-List |
|
_________________ B Jones
N154K
443-480-1023 |
|