|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
dvonruden(at)generalequip Guest
|
Posted: Sun Apr 10, 2011 6:03 pm Post subject: Engine Primer |
|
|
While trying to start the engine on my CJ today, the primer failed. Worked normal last time before winter hit Minnesota. Would not pump anything. Just gas trying to come out at the top of the primer. The good news is it will have its annual inspection this week. Have the repair manual. Anything specific we should look at as being the cause of the problem?
Thanks
Dennis
Dennis Von Ruden
President
[img]cid:image001.jpg(at)01CBF7C2.4E713830[/img]
620 Alexander Drive S.W.
P.O. Box 334
Owatonna, MN 55060
800.533.0524 voice
+5074515510 voice
877.344.4375 fax
+5074515511 fax
dvonruden(at)generalequip.com (dvonruden(at)generalequip.com)
www.generalequip.com
--------------------------------------------------------------------------------
ALL INFORMATION IN THIS EMAIL, AND/OR ATTACHMENT(S) IS CONFIDENTIAL. If you received this e mail in error, and are not the recipient(s) or responsible for receiving this e mail for the recipient, please inform the sender immediately, delete the e mail and any attachment(s) associated.
This email has been scanned by Barracuda - Email Security System.
| - The Matronics Yak-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
Description: |
|
Filesize: |
3.42 KB |
Viewed: |
1798 Time(s) |
|
|
|
Back to top |
|
|
dsavarese0812(at)bellsout Guest
|
Posted: Mon Apr 11, 2011 3:46 am Post subject: Engine Primer |
|
|
If the fuel is coming out of the primer pump around the knurled nut and
the shaft of the pump, it may very well be the flat O-ring on the end of
the pump. Easy to replace and readily available. Loosen the knurled
nut. Turn the primer handled to the left and extract the pump. You
will see the flat O-ring on the end of the shaft. I'm sure Doug has them
in stock.
Dennis
On 4/10/2011 9:00 PM, Dennis Von Ruden wrote:
Quote: | While trying to start the engine on my CJ today, the primer failed.
Worked normal last time before winter hit Minnesota. Would not pump
anything. Just gas trying to come out at the top of the primer. The good
news is it will have its annual inspection this week. Have the repair
manual. Anything specific we should look at as being the cause of the
problem?
Thanks
Dennis
Dennis Von Ruden
President
GNE_Logo
620 Alexander Drive S.W.
P.O. Box 334
Owatonna, MN 55060
800.533.0524 voice
+5074515510 voice
877.344.4375 fax
+5074515511 fax
dvonruden(at)generalequip.com <mailto:dvonruden(at)generalequip.com>
www.generalequip.com <http://www.generalequip.com/>
--------------------------------------------------------------------------------
ALL INFORMATION IN THIS EMAIL, AND/OR ATTACHMENT(S) IS CONFIDENTIAL. If
you received this e mail in error, and are not the recipient(s) or
responsible for receiving this e mail for the recipient, please inform
the sender immediately, delete the e mail and any attachment(s) associated.
This email has been scanned by Barracuda - Email Security System.
|
| - The Matronics Yak-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|