Matronics Email Lists :: View topic - CARBMATE TS-111 ATTACHMENTS TO 912?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

CARBMATE TS-111 ATTACHMENTS TO 912?

Matronics Email Lists Forum Index -> RotaxEngines-List

View previous topic :: View next topic

Author Message

Goodone

Joined: 13 Sep 2008
Posts: 49

Posted: Mon Apr 11, 2011 11:04 am Post subject: CARBMATE TS-111 ATTACHMENTS TO 912?

I am considering the purchase of a Carbmate TS-111 for use in synchronizing the carburetors on my ROTAX 912 UL. The basic TS-111 seems to come with cable to connect it to your battery and two lines to connect to the engine. Must I purchase an adapter kit to attach the vacuum lines to the 912 or is the basic Carbmate TS-111 all that I need?



Thanks for any info that you can provide.

- The Matronics RotaxEngines-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

dpark748(at)hotmail.co.uk
Guest

Posted: Mon Apr 11, 2011 12:45 pm Post subject: CARBMATE TS-111 ATTACHMENTS TO 912?

It is easier with the two adapters that screw in to the manifold to connect the vac tubes to, then you only have to undo one end of balance tube and block off.

 Dave  G-LDVO

 

 > Subject: CARBMATE TS-111 ATTACHMENTS TO 912?

[quote] From: goodone41(at)verizon.net

 Date: Mon, 11 Apr 2011 12:04:16 -0700

 To: rotaxengines-list(at)matronics.com

 

 --> RotaxEngines-List message posted by: "Goodone" <goodone41(at)verizon.net>

 

 I am considering the purchase of a Carbmate TS-111 for use in synchronizing the carburetors on my ROTAX 912 UL. The basic TS-111 seems to come with cable to connect it to your battery and two lines to connect to the engine. Must I purchase an adapter kit to attach the vacuum lines to the 912 or is the basic Carbmate TS-111 all that I need?

 

 Thanks for any info that you can provide.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=336651#336651

 

 

 

 

 

 > 

 

 

 		 	   		     	  Quote: 	
		  [b]

- The Matronics RotaxEngines-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

rlborger(at)mac.com
Guest

Posted: Mon Apr 11, 2011 12:47 pm Post subject: CARBMATE TS-111 ATTACHMENTS TO 912?

Goodone:



I have one, it works great.  It is complete.  You shouldn't need anything else for your 912.



Bob Borger

Europa Kit #A221 N914XL, XS Tri-Gear, Intercooled 914, Airmaster C/S Prop

http://www.europaowners.org/forums/gallery2.php?g2_itemId=60232

http://www.biplaneforumgallery.com/index.php?cat=10046

Europa Flying!

3705 Lynchburg Dr.

Corinth, TX  76208

Home:  940-497-2123

Cel:  817-992-1117



On Apr 11, 2011, at 14:04, Goodone wrote:



 	  Quote: 	
		   

 

 I am considering the purchase of a Carbmate TS-111 for use in synchronizing the carburetors on my ROTAX 912 UL. The basic TS-111 seems to come with cable to connect it to your battery and two lines to connect to the engine. Must I purchase an adapter kit to attach the vacuum lines to the 912 or is the basic Carbmate TS-111 all that I need?

 

 Thanks for any info that you can provide.

- The Matronics RotaxEngines-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

Goodone

Joined: 13 Sep 2008
Posts: 49

Posted: Thu Apr 28, 2011 4:54 pm Post subject: Re: CARBMATE TS-111 ATTACHMENTS TO 912?

I recently received my Carbmate and we synchronized my friends 912S with success. My friend had a good deal of hose of the same diameter as the cross-over tubing used on the engine. We used plastic adapters to attach his tubing to the small diameter hose supplied with the Carbmate. We just disconnected the 912S cross-over assembly from the intake manifolds on each side of the engine and attached our hose assemblies directly to the manifold fittings on each side of the engine. Worked great!

- The Matronics RotaxEngines-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RotaxEngines-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum